|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-29-2019, 04:25 PM | #1 |
Senior Member
Join Date: May 2010
Location: New Zealand
Posts: 298
|
1932/36 Waterpumps
Just wondering should all 32/36 water pump pulleys have a pin through the shaft?
|
05-29-2019, 10:00 PM | #2 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,102
|
Re: 1932/36 Waterpumps
The production versions were pinned; the later service pulleys were pressed on. Note that early '32 V8 pulleys and water pump shafts were about 3/8" shorter than all those that followed through the '36 model year.
|
Sponsored Links (Register now to hide all advertisements) |
|
05-29-2019, 10:18 PM | #3 |
Senior Member
Join Date: May 2010
Location: New Zealand
Posts: 298
|
Re: 1932/36 Waterpumps
Sponsored Links (Register now to hide all advertisements)
As I thought. The reason I asked I had a pair rebuilt by skip and he did not fit pins back in them although the ones I had supplied for rebuilding originally did have pins. He had filled the pin holes and obviously was happy with a pressed on pulley. I have since drilled the shafts and fitted pins as a safety issue. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|