|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-12-2015, 12:45 PM | #1 |
Senior Member
Join Date: May 2010
Location: Lakewood, CO
Posts: 413
|
'40 front brake hose to short
Does anyone have a part number for a front brake hose 19" long?
|
06-12-2015, 01:09 PM | #2 |
Member
Join Date: Apr 2015
Location: Simi Valley, California
Posts: 33
|
Re: '40 front brake hose to short
Does it matter what the ends are? male/female Chevy, Ford.
__________________
Really, I'm Trying |
Sponsored Links (Register now to hide all advertisements) |
|
06-12-2015, 01:24 PM | #3 |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,114
|
Re: '40 front brake hose to short
I would think " '40 front" on an old FORD forum would make that fairly clear. The real question might be.......Why so long? 15-3/4" is normal length. DD
|
06-12-2015, 02:14 PM | #4 |
Senior Member
Join Date: May 2010
Location: Mid coast Maine
Posts: 1,878
|
Re: '40 front brake hose to short
The # is for stock FC7600 15 9/32 long Front
You could try FC4774 18 13/32 Same thread. The mounting hole must have been changed. |
06-12-2015, 02:49 PM | #5 |
Member
Join Date: Apr 2015
Location: Simi Valley, California
Posts: 33
|
Re: '40 front brake hose to short
My bad, I was on the HAMB before and it was just a reflex.
__________________
Really, I'm Trying |
06-12-2015, 03:20 PM | #6 |
Senior Member
Join Date: May 2010
Posts: 232
|
Re: '40 front brake hose to short
Sponsored Links (Register now to hide all advertisements)
Early Ford Store has them. 18.2" long
__________________
Chisel Evil Lurks...for those that don't carry a side arm!!! |
06-12-2015, 03:56 PM | #7 |
Senior Member
Join Date: May 2010
Location: Lakewood, CO
Posts: 413
|
Re: '40 front brake hose to short
Sorry, I should have been more clear. I am putting '40 brakes on my '32. The hole in the frame is drilled just behind the stock shock, this makes a stretch for a 16 7/8" hose. No room for suspension flex, that's why I am thinking 19" will work good.
|
06-12-2015, 04:01 PM | #8 | |
Senior Member
Join Date: May 2010
Location: Mill Valley,Ca.
Posts: 1,509
|
Re: '40 front brake hose to short
Quote:
Karl |
|
06-12-2015, 06:55 PM | #9 |
Senior Member
Join Date: May 2010
Location: Illinois
Posts: 2,184
|
Re: '40 front brake hose to short
Wagner Raybestos 4497 is longer than the 40 front hose.
John |
06-12-2015, 07:46 PM | #10 |
Senior Member
Join Date: May 2010
Location: Capital of Corruption , NY
Posts: 811
|
Re: '40 front brake hose to short
I had a similar hose length problem. I found that searching NAPAs online cat will give you a hose that will work. It may take some time searching thru the many options but you find one that will work. Here is an example
http://www.napaonline.com/Catalog/Ca...242_0342278658 I'll look for the part# I used in the morning. |
06-13-2015, 06:17 AM | #11 |
Senior Member
Join Date: May 2010
Location: Mid coast Maine
Posts: 1,878
|
Re: '40 front brake hose to short
The Wagner FC 4774 is 18 13 /32 try Plymouth 35-38
FC 4950 Divco and IHC 20" long. |
06-13-2015, 09:32 AM | #12 |
Senior Member
Join Date: May 2010
Location: on the Littlefield
Posts: 6,159
|
Re: '40 front brake hose to short
Another option is to have them made--the local hydraulic hose place here can make brake hoses ---any length up to what's on the roll in one piece
|
06-13-2015, 09:56 AM | #13 |
Senior Member
Join Date: May 2010
Location: Mansfield, Ohio
Posts: 409
|
Re: '40 front brake hose to short
Go to your local Napa store. Have the counterman get out the brake hose buyers guide. In this catalog you will find descriptions of all the hoses that Napa lists, by length, type of fittings and any mounting brackets.
|
06-13-2015, 08:35 PM | #14 |
Senior Member
Join Date: May 2010
Location: Lakewood, CO
Posts: 413
|
Re: '40 front brake hose to short
Thanks for the help. Going to NAPA to go through their book.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|