The Ford Barn

Mike/Nebraska · 08-26-2010, 05:34 PM

I am putting the body back on my 29 roadster and I have a question. Does the frame welting go all the way from the rear crossmember to the front of the frame. I guess I didn't remember my front fenders having anything under them, but it seems likely it would help with squeaks

Steve Plucker · 08-26-2010, 07:48 PM

I believe it goes from the front of the frame to the end of the running board splash apron which is attached to the frame...it stops right there.

Pluck

Mike/Nebraska · 08-26-2010, 09:13 PM

thanks guys, for your help.

Rowdy · 08-26-2010, 11:29 PM

Those two fixed you up with good info. Glad to see you posting again. I am not going to be able to make the Freemont swapmeet, so one less person to compete with for the goodies. Might need to have you look out for afew small parts. Will send PM closer to mid Sept. Rod

Craig Lewis · 08-26-2010, 11:46 PM

Say do you fellas know if it's the same for a 31 coupe?

....I mean does frame welt stop @ rear of splash apron?

Rowdy · 08-26-2010, 11:54 PM

Sponsored Links (Register now to hide all advertisements)

I think that the 30-31's ended in the same place in back, but went to the underside of the frame horns somewhat in front. I am sure someone will correct me if I am wrong. Rod

08-26-2010, 05:34 PM	#1
Mike/Nebraska Senior Member Join Date: May 2010 Location: Eastern, Nebraska Posts: 354	Frame welting I am putting the body back on my 29 roadster and I have a question. Does the frame welting go all the way from the rear crossmember to the front of the frame. I guess I didn't remember my front fenders having anything under them, but it seems likely it would help with squeaks

08-26-2010, 07:48 PM	#2
Steve Plucker BANNED Join Date: May 2010 Location: Walla Walla, Washington USA Posts: 6,066	Re: Frame welting I believe it goes from the front of the frame to the end of the running board splash apron which is attached to the frame...it stops right there. Pluck

08-26-2010, 09:13 PM	#3
Mike/Nebraska Senior Member Join Date: May 2010 Location: Eastern, Nebraska Posts: 354	Re: Frame welting thanks guys, for your help.

08-26-2010, 11:29 PM	#4
Rowdy BANNED Join Date: May 2010 Location: Gothenburg Nebraska Just off I-80 Posts: 4,893	Re: Frame welting Those two fixed you up with good info. Glad to see you posting again. I am not going to be able to make the Freemont swapmeet, so one less person to compete with for the goodies. Might need to have you look out for afew small parts. Will send PM closer to mid Sept. Rod __________________ Do the RIGHT thing - Support the H.A.M.B. Alliance!!!!

08-26-2010, 11:46 PM	#5
Craig Lewis Senior Member Join Date: May 2010 Location: Parksville B.C. Canada Posts: 880	Re: Frame welting Say do you fellas know if it's the same for a 31 coupe? ....I mean does frame welt stop @ rear of splash apron?

08-26-2010, 11:54 PM	#6
Rowdy BANNED Join Date: May 2010 Location: Gothenburg Nebraska Just off I-80 Posts: 4,893	Re: Frame welting Sponsored Links (Register now to hide all advertisements) I think that the 30-31's ended in the same place in back, but went to the underside of the frame horns somewhat in front. I am sure someone will correct me if I am wrong. Rod __________________ Do the RIGHT thing - Support the H.A.M.B. Alliance!!!!