|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-18-2019, 11:17 PM | #1 |
Senior Member
Join Date: May 2010
Location: Santee, California
Posts: 3,505
|
Need dimension of bearing surface axle housing race
The title says it. Anyone that can help me with the housing race dimension or wear limit ?
40 ford |
05-19-2019, 11:38 PM | #2 |
Senior Member
Join Date: May 2010
Location: Santee, California
Posts: 3,505
|
Re: Need dimension of bearing surface axle housing race
Come on guys someone has the answer. How about a repair sleeve. Can I get an outside dimension?
|
Sponsored Links (Register now to hide all advertisements) |
|
05-20-2019, 01:17 AM | #3 |
Senior Member
Join Date: Dec 2014
Location: Upper Peninsula, Michigan
Posts: 604
|
Re: Need dimension of bearing surface axle housing race
I've read on here and wrote it down some time ago. Factory 2.061 to 2.063 max. additional wear allowed is minus 5 mils. I don't really get the mils part. I believe it means .005?
Not sure on the wear spec.completely. I've measured on my car years ago with replaceable sleeves installed before I owned the car. Areas where the bearing didn't ride measured in the spec. I wrote above. |
05-20-2019, 09:57 AM | #4 |
Senior Member
Join Date: May 2010
Location: Santee, California
Posts: 3,505
|
Re: Need dimension of bearing surface axle housing race
Thank YOU sir!
|
05-20-2019, 01:15 PM | #5 |
Senior Member
Join Date: Dec 2014
Location: Upper Peninsula, Michigan
Posts: 604
|
Re: Need dimension of bearing surface axle housing race
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|