|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-09-2010, 12:36 PM | #1 |
Senior Member
Join Date: May 2010
Location: NC
Posts: 2,975
|
Grinding a crank with Dads portable crank grinder
Here are some pictures of grinding a crank with a portable crank grinder. I had not used it to grind a crank for almost 50 years. We use to grind cranks in the car back in the day. Most of the time it was just one rod journal. We had a big crankgrinder we used when the crank was out of the car.
This is not the best way to grind, but I wanted my mains with no run out. Most of the cranks that I have had ground by some one else, run out at the flywheel, and crank gear. The mains are done, but forgot to take a picture of that setup. Just another way of doing things. A picture of rod piston and crankshaft that let go a 5000 rpms at the hill climb. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|