1930 Murray Exterior Door Key

[GT1929]

Have remove lock and there is a number on the shaft No. A1102.
Don't know if this is key number?
If so can I get a new key?

[shew01]

Dick Crabtree does excellent work.

POB 33
Pickstown SD 57367
US

(605) 487-7229


Sent from my iPhone using Tapatalk

[Afordman31]

I had a ignition lock with the A**** number and took it to a lock shop and they looked it up on their cards and made me a key right away. Try a lock shop and you should have success.

[GT1929]

Originally Posted by shew01

Dick Crabtree does excellent work.

POB 33
Pickstown SD 57367
US

(605) 487-7229


Sent from my iPhone using Tapatalk

Thanks will try a lock shop, I'm in New Zealand

[GT1929]

Hello, Had local Locksmith make two keys for this outside door lock bit of trouble installing it until I put a wire though lock and into shaft end which help line the shaft up when pushing lock into door. Lock now works as it should.

[Synchro909]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by GT1929

Hello, Had local Locksmith make two keys for this outside door lock bit of trouble installing it until I put a wire though lock and into shaft end which help line the shaft up when pushing lock into door. Lock now works as it should.

You were lucky they had a blank.

[GT1929]

Synchro909,

Didn't seem to be a problem asked how many keys I wanted.
Cheers Graeme

[shew01]

Originally Posted by Synchro909

You were lucky they had a blank.

Agreed. I had a key and just wanted a duplicate made so I would have a spare. Our best lock shop in the area didn’t have a way to get a blank. They butchered a similar key blank and fudged it enough to make it work. It was an ugly mess.


Sent from my iPhone using Tapatalk