01-29-2015, 11:26 AM | #21 |
Senior Member
Join Date: Jul 2010
Location: Plainfield, IN
Posts: 360
|
Re: Introduction
I must have been sleeping or something - I did not know that Eckler’s & Mac’s were the same comany - I have brought from both companies in the past and offen have had to go elsewhere when the shipping cost made you uncompetitive. So what can be done to correct this problem? I just bought a '52 Ford that is in need of parts!!
__________________
4 doors are better than no doors! |
01-29-2015, 12:09 PM | #22 |
Senior Member
Join Date: Sep 2013
Posts: 3,005
|
Re: Introduction
Welcome to the Ford barn.
I have bought a lot of stuff for my car and Mac's has been a positive experience. Your web site is very hard to find parts. If you just type in the name or the part rather than the number from the catalog it will never find the part. I found If in Google I type in Mac's and the part name then I can usually find the part number. But your site almost never finds the parts for me? Maybe I am using it wrong. |
Sponsored Links (Register now to hide all advertisements) |
|
01-29-2015, 12:35 PM | #23 |
Senior Member
Join Date: May 2010
Location: Perry, Ohio 44081
Posts: 579
|
Re: Introduction
In recent years I have had no problems with Mac's and now I have had several orders with Eckler's and no problems with them either. Of course I call my orders in and find out if what I want is in stock. Saves on having a problem later. Received my stuff quick too. Sorry to hear some others report long waits. They could use smaller boxes in some cases and that would save on our shipping costs.
Last edited by JimOH; 02-15-2015 at 10:46 AM. |
01-29-2015, 01:34 PM | #24 |
Senior Member
Join Date: May 2010
Location: Santee, California
Posts: 3,505
|
Re: Introduction
The issue of shipping has been raised already, but I'll be more specific for an example in point. When in the process of purchasing a new authentic Stromberg 97 carb, I was quoted $50 shipping. Granted, there was a promo discount on the carb, but really, $50 to ship a small carburetor. Made the whole deal, no deal. I decided to not buy.
|
01-29-2015, 01:59 PM | #25 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: Introduction
I think the companies that can work the low and/or free shipping are the ones that will be getting the orders in the future. Jegs in free shipping on everything and I have started ordering a LOT from them. Summit is free over $100 I believe. I also order a lot through Amazon with their free two day delivery.
|
01-29-2015, 02:13 PM | #26 | |
Senior Member
Join Date: Jan 2011
Location: Central Ohio
Posts: 5,079
|
Re: Introduction
Sponsored Links (Register now to hide all advertisements)
Quote:
|
|
01-29-2015, 06:56 PM | #27 |
Senior Member
Join Date: Jan 2012
Posts: 247
|
Re: Introduction
I agree with Frank W. - the Mac's web site doesn't seem to work right. I'm glad they send out paper catalogs, they always work!
|
01-29-2015, 07:10 PM | #28 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: Introduction
I really like the way the Mac site works, just enter the part number, very simple and straight forward. That seems like the best method to assure you are looking at the correct part to me.
|
01-29-2015, 07:24 PM | #29 |
Senior Member
Join Date: Aug 2012
Location: Perth, Western Australia
Posts: 2,687
|
Re: Introduction
Welcome Trevor, your website is great but if you guys can lower your shipping, you'll be doing far better. It hurts a lot for some of us overseas clients even more now our dollar is only 75% to your USD.
__________________
"Came too close to dying to stop living now!" |
01-29-2015, 07:30 PM | #30 |
Senior Member
Join Date: Jan 2012
Posts: 247
|
Re: Introduction
The trouble with "just enter the part number" is I wouldn't know the part number until I found the part - classic catch 22.
|
01-29-2015, 07:33 PM | #31 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: Introduction
The easy way is to look the part up in the Green Book, then you know you have the correct part and you have the part number. I really don't trust a parts catalog without knowing the numbers anyway. I have both a paper copy and a computer version of the Green Book and it makes life a whole lot easier.
|
01-29-2015, 08:26 PM | #32 |
Senior Member
Join Date: Apr 2012
Location: Palestine, Texas
Posts: 181
|
Re: Introduction
Hi, nice to see you show up here. I have been sending the negative threads to you for some time as you can't fix it if you don't know it's broken. It will be interesting to see if you can get them to change the things that keep many of us from shopping with you. Shipping cost is the biggie right now.
__________________
John Live for today, but save for tomorrow! |
01-29-2015, 11:40 PM | #33 |
Senior Member
Join Date: May 2010
Location: Colorado
Posts: 1,264
|
Re: Introduction
Shipping costs and follow through have changed significantly, I try to hold out or find things elsewhere these days.
|
01-30-2015, 08:39 AM | #34 |
Senior Member
Join Date: May 2010
Location: Cocoa Florida
Posts: 180
|
Re: Introduction
Will any Ford parts be available at the new Eckler warehouse in Titusville Fl. ?
|
01-30-2015, 08:50 AM | #35 |
Senior Member
Join Date: Jan 2015
Posts: 132
|
Re: Introduction
Unfortunately not. All Ford products are located in New York. But you can still come in our Titusville showroom and place your order.
|
01-30-2015, 04:50 PM | #36 |
Senior Member
Join Date: May 2010
Location: Crowley, TX
Posts: 328
|
Re: Introduction
Paper catalog is great, internet catalog is a jumbled up disorganized mess.
|
01-31-2015, 12:11 AM | #37 |
Senior Member
Join Date: Oct 2011
Location: elmira,ny
Posts: 1,518
|
Re: Introduction
Even if you know the part no. and description, from the catalog, lots of times the on-line catalog will come up with " no matches found"
|
04-26-2015, 11:09 PM | #38 |
Member
Join Date: Nov 2013
Location: Anderson, IN
Posts: 44
|
Re: Introduction
Scott / Trevor....
This is copied and pasted from a previous thread I had posted on from 06/05/2014: I washed my hands of Macs a couple months ago...customer service is horrible at best. After placing a $500 online order for various parts and receiving the order, I noticed the idler arm was missing. Due to being in a time crunch to get the car back together, I contacted them the next day and was told even though the idler arm was listed online as "in stock" it was on a 2 week backorder. They apologized and made arrangements to drop ship the part and assured me I would have it within 2 weeks. Every 2 weeks for the next 6 I was fed the same line. The last straw came when I called to speak with a "supervisor" about the matter and was told "we sell parts to thousands of people every day...I don't have time to track down your $30 part". This isn't the first time I've experienced issues like this with them but it will certainly be the last. I got a chuckle last week when a friend mentioned he had just ordered the same idler arm a few days ago and they are still passing out the same line 2 months later... Also, someone had mentioned they were now owned by Ecklers and this is correct. I also had similar experiences last year while spending thousands of dollars through Ecklers buying parts for an Impala restoration. I guess the moral of the story here is a little courtesy and good customer service goes a long way and Mac's is a great example on how NOT to treat customers in my book. I do appreciate you guys joining this forum and I hope your concerns and dedication to fixing these problems is genuine. Obviously these issues arent isolated and its quite apparent there is a huge problem with the entire customer service structure of this company. Please dont take this personal, but Ive probably spent close to 10K between both Ecklers and Mac's within the last few years but refuse to buy so much as a single cotter pin from either one until I see and hear reviews that reflect their attitude and decication to their customers makes a complete 180 turn. For clarification, please feel free to reread my "last straw" explained above. I WILL NOT be treated like trash and suggest someone gets this bus trurned around before it nose dives off a cliff, there are plenty of other venders to buy parts from. Since I have jumped ship, your competitors have been gladly taking my money and offering great customer service in return. A HUGE amount of your Ford customer base are members here on the barn and im confident you are already fully aware that the majority of buzz going around about Mac's is negative in one form or another. I hope you can "fix" things before its too late. Keep us posted on your progress Dennis Last edited by Flatkid8; 04-27-2015 at 12:09 AM. |
04-27-2015, 12:38 AM | #39 |
Senior Member
Join Date: Jul 2011
Location: SF Bay Area
Posts: 6,652
|
Re: Introduction
Some guys think that a big outfit is capable of personal service, and are amazed to find out nobody they talk to gives a rat's ax.
Stick to the small dealers. They are the ones that actually have a stake in keeping your business.
__________________
Alan |
04-27-2015, 06:11 AM | #40 | |
Senior Member
Join Date: Jan 2015
Posts: 132
|
Re: Introduction
Quote:
Scott |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|