Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 06-02-2018, 02:20 PM   #1
Kohnke Rebabbitting
Senior Member
 
Join Date: May 2010
Location: 60615,330th Ave.,Clare, Iowa, 50524
Posts: 1,409
Default Machine Videos

There are some Machine Videos of this machine Shop doing a Model A, or B, Ford.


Comments Please!




https://www.youtube.com/watch?v=rDD78ADKP_w
Kohnke Rebabbitting is offline   Reply With Quote
Old 06-02-2018, 02:50 PM   #2
Brentwood Bob
Senior Member
 
Join Date: May 2010
Location: brentwood, ca
Posts: 2,864
Default Re: Machine Videos

Crank grinding one was revitting.
Saw a recent build and owner ordered a second right away.
Said it ran like a Swiss watch. However, when towed on a dolly in gear the first engine took out #1 cylinder.
Brentwood Bob is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 06-02-2018, 03:33 PM   #3
4port
Senior Member
 
4port's Avatar
 
Join Date: May 2010
Location: Dallas TX
Posts: 111
Default Re: Machine Videos

Where is the head and block resurfacer. Where is the boring bar, who chases a cylinder bore on mill. Needs sleeve and valve seat installed. Forget about boring oversize, let's just hone it dry, it cuts faster. We dont own a cylinder honing machine, or boring bar. It's a blue printed "race block". I'm sure I saw a positive pressure clean room for assembly, didn't you? You saw in on the Internet, it must be true.
__________________
Remember when flying low inverted, down is up, and up can be expensive.
4port is offline   Reply With Quote
Old 06-02-2018, 04:58 PM   #4
F.M.
Senior Member
 
Join Date: Sep 2017
Posts: 330
Default Re: Machine Videos

Better off using a file !!
F.M. is offline   Reply With Quote
Old 06-02-2018, 06:20 PM   #5
Mark DeRoseau
Member
 
Mark DeRoseau's Avatar
 
Join Date: Aug 2014
Location: Grand Rapids MI
Posts: 45
Default Re: Machine Videos

Bet they used the scale to tram the head in as well, before they put their last good insert in that bear claw. Actually don't think there was one good insert in that thing.....
Mark DeRoseau is offline   Reply With Quote
Old 06-02-2018, 11:17 PM   #6
Brentwood Bob
Senior Member
 
Join Date: May 2010
Location: brentwood, ca
Posts: 2,864
Default Re: Machine Videos

Quote:
Originally Posted by Brentwood Bob View Post
Crank grinding one was revitting.
Saw a recent build and owner ordered a second right away.
Said it ran like a Swiss watch. However, when towed on a dolly in gear the first engine took out #1 cylinder.
Well maybe I should watch the video first, assumed it was of your video.
Brentwood Bob is offline   Reply With Quote
Old 06-03-2018, 01:53 PM   #7
Pete
Senior Member
 
Pete's Avatar
 
Join Date: May 2010
Location: Wa.
Posts: 3,510
Default Re: Machine Videos

Mickey Mouse was a piker compared to those guys.
Pete is offline   Reply With Quote
Old 06-03-2018, 03:46 PM   #8
Benson
Senior Member
 
Join Date: May 2010
Location: Central Highlands, Cen~Col.
Posts: 1,887
Default Re: Machine Videos

...

Last edited by Benson; 06-03-2018 at 06:41 PM.
Benson is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 09:32 PM.