01-10-2024, 12:42 PM
|
#1 |
|
Member
Join Date: May 2010
Location: Appleton, Wisconsin
Posts: 58
|
AER Rod Bolts
Might be a long shot but I am trying to come up with a part number for the AER inserted rod bolts. Looks like an ARP bolt but haven’t been able to match it up. Rods are about 12 years old back when Rich was in Skokie. Can’t seem to get a hold of the new guys in Indiana. Just thought I would throw it out there see if anyone has dealt with this. Thank you.
|
|
|
|
01-10-2024, 02:07 PM
|
#2 |
|
Senior Member
Join Date: Jun 2010
Location: 34.22 N 118.36 W
Posts: 1,057
|
Re: AER Rod Bolts
As I recall that is a pretty short 3/8” bolt
Can you post a picture of one? J
__________________
As Carroll Smith wrote; All Failures are Human in Origin. |
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
01-10-2024, 02:36 PM
|
#3 |
|
Member
Join Date: May 2010
Location: Appleton, Wisconsin
Posts: 58
|
Re: AER Rod Bolts
|
|
|
|
|
01-10-2024, 03:04 PM
|
#4 |
|
Senior Member
Join Date: Aug 2010
Location: SF Bay Area
Posts: 193
|
Re: AER Rod Bolts
McMaster-Carr sells hi quality 12 pt bolts. Probably not ARP quality but ......
https://www.mcmaster.com/products/bolts/?s=bolts Looks like you should contact AER if you want the same exact thing. The shoulder aligns the rod and cap so... You might call Snyders also. |
|
|
|
|
01-10-2024, 03:20 PM
|
#5 |
|
Senior Member
Join Date: Jan 2012
Location: Western North Carolina
Posts: 3,897
|
Re: AER Rod Bolts
6 radial lines means it is a grade 8 bolt. It would be difficult to machine, although not impossible. You may have to result to having the bolts made by a machine shop.
__________________
A is for apple, green as the sky. Step on the gas, for tomorrow I die. Forget the brakes, they really don't work. The clutch always sticks, and starts with a jerk. My car grows red hair, and flies through the air. Driving's a blast, a blast from the past. |
|
|
|
|
01-10-2024, 06:12 PM
|
#6 |
|
Senior Member
Join Date: Jun 2010
Location: 34.22 N 118.36 W
Posts: 1,057
|
Re: AER Rod Bolts
Sponsored Links (Register now to hide all advertisements)
Your best bet is to try Snyders or Brattons if you cannot get ahold of AER It doesn’t look too complicated to machine but it is not simple and getting a radius wrong could be disastrous Best J
__________________
As Carroll Smith wrote; All Failures are Human in Origin. |
|
|
|
|
01-10-2024, 06:43 PM
|
#7 |
|
Member
Join Date: May 2010
Location: Appleton, Wisconsin
Posts: 58
|
Re: AER Rod Bolts
Heard from AER in Indiana and they sell the rod bolts so problem solved.
Appreciate everyones input. Thank you |
|
|
|
|
01-11-2024, 12:13 PM
|
#8 |
|
Senior Member
Join Date: May 2010
Location: Southern Maine
Posts: 1,499
|
Re: AER Rod Bolts
Glad to hear that they will sell replacement bolts. I have a set of those rods in my car and always wondered about sourcing new bolts if needed.
|
|
|
|
|
01-12-2024, 03:13 PM
|
#9 |
|
Member
Join Date: May 2010
Location: Appleton, Wisconsin
Posts: 58
|
Re: AER Rod Bolts
Spoke with Missy at Antique Engine Rebuilding in Bluffton Indiana on Thursday morning and have a set of rod bolts at my door Friday, in a blizzard no less. Great people to deal with and excellent service. Good company worth supporting.
|
|
|
|
|
01-13-2024, 11:52 AM
|
#10 |
|
Senior Member
Join Date: May 2010
Location: Southern Maine
Posts: 1,499
|
Re: AER Rod Bolts
Keep those inserts coming!!
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
Linear Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 06:24 AM.