01-28-2015, 08:28 AM | #1 |
Senior Member
Join Date: Jan 2015
Posts: 132
|
Introduction
Hey all,
My name is Trevor and I work with Eckler's Industries, specifically MAC's Auto Parts. Anyway, I'm here to try to help answer any of your questions or concerns so by all means feel free to shoot me a message if anything comes up. |
01-28-2015, 09:11 AM | #2 |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,534
|
Re: Introduction
This oughtta be good!
. |
Sponsored Links (Register now to hide all advertisements) |
|
01-28-2015, 09:18 AM | #3 |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,534
|
Re: Introduction
On second thought, although some of my experiences with Mac's , --and their manufacturing side (Specialized & Cartouche) have been 'less than stellar' in the past, I will definitely give you the benefit of the doubt in this since you have come trying to be of assistance.
May I ask what your background is pertaining to Model-A restoration and/or repair of them? Why I am asking is, if I were to inquire as to what I would need to do to one of your 1928 steering wheels to make it fit correctly, is this something you would have first-hand knowledge on what I would need to do? Maybe the same question in other areas such as if I were to ask you about seat fabric for a 1930 Sport Coupe, --and more specifically how close is it to original material, is this something you could help me answer accurately? Thanks, and welcome to Fordbarn! |
01-28-2015, 09:27 AM | #4 |
BANNED
Join Date: May 2010
Location: Gothenburg Nebraska Just off I-80
Posts: 4,893
|
Re: Introduction
Much like Brent I am glad you are here to help. I have only had one experiece with Mac's and it was not good. Think I will keep doing business with Bert's for the foreseeable future. Thanks Rod
__________________
Do the RIGHT thing - Support the H.A.M.B. Alliance!!!! |
01-28-2015, 09:54 AM | #5 |
Senior Member
Join Date: May 2010
Location: Lakeville, MN
Posts: 5,168
|
Re: Introduction
Like Rowdy (Rod) and Brent, I haven't had a good experience with Mac's. Twice, at different times (about a year a part) I have ask the person on the phone at Mac's who makes the part I am inquiring about - both were sheetmetal items. In a condescending voice, both times the person stated Mac's does not divulge there suppliers. The reason I ask is I have had several bad experiences with Howell's in TX items - poorly made and ill fitting parts. Needless to say, I didn't purchase the items from Mac's. Since Mac's did not provide their suppliers like Bratton's, Bert's and some other parts suppliers will do if ask, I have not been a Mac's customer since. This is my experience with Mac's and maybe things have changed since it has been a few years since my inquiries, but I will never know if Mac's had changed, as I am happy with other parts supplier that are more user friendly.
Rusty Nelson |
01-28-2015, 10:14 AM | #6 |
Senior Member
Join Date: Aug 2011
Location: Eagle Bend, MN
Posts: 2,027
|
Re: Introduction
Sponsored Links (Register now to hide all advertisements)
|
01-28-2015, 10:19 AM | #7 |
Senior Member
Join Date: Jan 2015
Posts: 132
|
Re: Introduction
Hey all,
Thanks for the welcome. Brent: In regards to my personal experience, I've been around Fords for a while and I feel that I have a pretty good grasp on what makes them tick as well as restoration solutions. If you have any specific questions regarding parts or restoration, feel free to shoot me a message any time and I will do my best to get back to you as soon as I'm available. To Rowdy and Wrndln: I apologize for your bad experience, and while I can't undo what other people have done or said, I will try to do my best to remedy the situation and provide as much help as is possible. Again, thank you for your responses and I look forward to interacting with all of you in the future. |
01-28-2015, 10:50 AM | #8 |
Senior Member
Join Date: Nov 2011
Location: Barrington, NJ
Posts: 280
|
Re: Introduction
Still waiting for the call back on a right side lamp arm that I bought at Macs....it was shaped wrong...pointing down too much....bought another at Snyders, and it's perfect! I asked Macs to put the right next to the left to see if they could see a difference and get back to me, just in case I got some odd duck they weren't aware of.....never happened......
__________________
I work very hard to avoid all and any mistakes. I thought I made a mistake once, but I was wrong. |
01-28-2015, 11:03 AM | #9 |
Senior Member
Join Date: Nov 2012
Location: Sulphur Springs & Saltillo, Texas
Posts: 135
|
Re: Introduction
Now that you guys mentioned it:
When I started working on A's a few years ago, I bought exclusively from Mac's. As a result of a few problems (no need for details), I now buy from Snyder's and Mike's. |
01-28-2015, 11:07 AM | #10 |
BANNED
Join Date: May 2010
Location: Gothenburg Nebraska Just off I-80
Posts: 4,893
|
Re: Introduction
Please elaborate on your defination of "Been Around". Do you mean hads dirty and mind twisted trying to get them fixed or walking around them at car shows?? No ill will intended, just curous. Thanks Rod
__________________
Do the RIGHT thing - Support the H.A.M.B. Alliance!!!! |
01-28-2015, 11:11 AM | #11 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Introduction
There won't be enough left of this poor horse to make a tube of glue.
|
01-28-2015, 11:12 AM | #12 |
Senior Member
Join Date: Oct 2013
Location: Illinois
Posts: 382
|
Re: Introduction
I have had good luck ordering from Mac's. I like the fact that I can use paypal, their shipping and part quality has been good so far..
|
01-28-2015, 11:22 AM | #13 |
Senior Member
Join Date: May 2010
Location: OKC / Tonkawa, Ok.
Posts: 1,977
|
Re: Introduction
Like lambs to the wolves. Good luck!
__________________
Oklahoma City Model A Restorers Group. |
01-28-2015, 11:23 AM | #14 |
Senior Member
Join Date: May 2010
Location: Snohomish Wa.
Posts: 389
|
Re: Introduction
Is the parent company Eckler's Ind. the same company I used to get Corvette parts from years ago??
|
01-28-2015, 11:27 AM | #15 |
Senior Member
Join Date: Nov 2012
Location: Sulphur Springs & Saltillo, Texas
Posts: 135
|
Re: Introduction
Yes.
|
01-28-2015, 11:34 AM | #16 |
Senior Member
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 5,848
|
Re: Introduction
As a relatively new Model A enthusiast I have been trying most of the well known Model A Vendors to get a feel for them and to be perfectly honest there isn't one of the major players that I HAVE NOT had a problem with in some way besides MAC's.
My only complaint I have with MAC's (so far) is their shipping charges seem to be higher than some of the others. Last edited by Y-Blockhead; 01-28-2015 at 01:27 PM. |
01-28-2015, 11:36 AM | #17 | |
Senior Member
Join Date: Apr 2012
Posts: 1,542
|
Re: Introduction
Quote:
|
|
01-28-2015, 11:41 AM | #18 |
BANNED
Join Date: May 2012
Location: inside your RAM
Posts: 3,134
|
Re: Introduction
Greetings!
1. a better starting question is where are you on the ladder at Ecklers? If the bottom rung....well.....if you are a manager of some type, that is a different ball game. If we do not know the answer to this question then I submit we are wasting our time and typing fingers 2. Are you only gonna respond to PMs? If so, by not sharing with the rest of us how you have resolved issues, is not gonna build up any confidence. we had one post here a while back from someone with the handle 'egge' There was no acknowledgement of just where he was in the Egge corporate structure (if he even was), and no answers were forthcoming of some good questions asked of him. So, in other words, why did he bother to post? And these were common sense questions, not even critical, since few if any have had trouble with the real Egge 3. and yes, if you are unwilling to divulge your sources, then best of luck to you, since all the other suppliers do, and it is no skin off your teeth if you are using reputable suppliers to tell us that
__________________
'31 180A |
01-28-2015, 11:56 AM | #19 |
Senior Member
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,117
|
Re: Introduction
While Snyders does not typically list their sources in their catalog, they have always given me their source when asked. Never got a straight answer from Macs.
__________________
Alaskan A's Antique Auto Mushers of Alaska Model A Ford Club of America Model A Restorers Club Antique Automobile Club of America Mullins Owner's Club |
01-28-2015, 12:10 PM | #20 |
Senior Member
Join Date: Nov 2010
Location: Ottawa,Ontario, Canada
Posts: 271
|
Re: Introduction
Being in Canada, the one big issue many people have had is when you go to order many parts at once and they get shipped in more than one order so the shipping costs inflate your budget. The responses provided were that the parts were stored in different warehouses and that was the reason for the multiple shipments.
Would it be possible to co-ordinate orders better in the future so one order=one shipment? |
|
|
Sponsored Links (Register now to hide all advertisements) |
|