12-29-2013, 05:52 PM | #81 |
Member
Join Date: Oct 2013
Location: Reno
Posts: 59
|
Re: Harmon Collins Rotors ?????
I know you all have been waiting patiently for me to finish the rotors up, and wanted to post the progress. I'm hoping to get some time this week with the injection mold machine and wrap it up, meanwhile, I had to remake custom rivets that hold the terminals down, make ANOTHER mold (shown in attachment) to stamp out the spring copper contact. (Not regular copper either)
And, another mold to stamp out the brass (Low resistance brass BTW) contacts. Now that that's all done, we are ready for production/assembly!!! The real dirty moldmker picture is a fine wire that like a bandsaw, electrically extracts material away with high precision. The cncmaker picture is the other machine also with high precision electrically 'washes' away the "Swiss Steel" (what the molds are made from) cha ching $$$....not cheap stuff. enjoy |
12-29-2013, 09:29 PM | #82 |
Senior Member
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,858
|
Re: Harmon Collins Rotors ?????
I personally would not let those who may be impatient to get these rotors rush you along on this project. I would say take the time you need to do this like you want to see it done. No one will probably remember if it took you, three months, six months or longer to get this made right, but on the other hand, if they don't turn out right, they will never forget. Just my opinion. Thanks for taking the initiative do something like this that has been needed for a long time.
__________________
John "Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein |
Sponsored Links (Register now to hide all advertisements) |
|
12-29-2013, 10:12 PM | #83 |
Member
Join Date: Oct 2013
Location: Reno
Posts: 59
|
Re: Harmon Collins Rotors ?????
Thanks for the support.
|
12-30-2013, 02:16 PM | #84 |
Senior Member
Join Date: May 2010
Posts: 597
|
Re: Harmon Collins Rotors ?????
i agree with jm 35 sedan-- i would rather wait and see them done right
|
01-15-2014, 03:29 PM | #85 |
Member
Join Date: Oct 2013
Location: Reno
Posts: 59
|
Re: Harmon Collins Rotors ?????
Hi Guys!
Happy New Year.... well, see attachments, I think they came out pretty nice! the rivet on the right gets sheared down today and stamped down finalizing these puppies. Each (4) piece mold extract takes 7 minutes for ONE injection cycle with this Bakelite. Since I didn't want to alter the original design, they came out of the mold with difficulty. I only managed to produce about 85% and the rest needed to be chipped out due to the angles in the original design. (too straight) |
01-15-2014, 03:40 PM | #86 |
Senior Member
Join Date: May 2010
Location: Central Coast, Calif.
Posts: 839
|
Re: Harmon Collins Rotors ?????
Sponsored Links (Register now to hide all advertisements)
When you are ready, let us know where to send the check... Neal |
01-15-2014, 04:01 PM | #87 |
Senior Member
Join Date: May 2010
Location: Alameda, California
Posts: 335
|
Re: Harmon Collins Rotors ?????
I have no use for these in my applications, however I want to take a moment to thank-you for stepping up to the plate to help those of us who do need these.....I applaud you...Thank-you.........Matt in Alameda
|
01-15-2014, 04:25 PM | #88 |
Senior Member
Join Date: May 2010
Location: Sydney, Australia
Posts: 949
|
Re: Harmon Collins Rotors ?????
An outstanding effort, well done!
Are you able to install Ejector Pins on your mould to help remove the parts without damaging them. I may be talking thru my hat as I'm not familiar with Injection Moulds, but I have done a lot of Drop Forging, and on some dies the only way to remove a forging is with Ejector Pins. |
01-15-2014, 06:21 PM | #89 |
Senior Member
Join Date: May 2010
Posts: 597
|
Re: Harmon Collins Rotors ?????
they look great, ready to send my check when their ready... thanks tom
|
01-15-2014, 06:53 PM | #90 |
Senior Member
Join Date: May 2010
Location: Chester Vt
Posts: 8,860
|
Re: Harmon Collins Rotors ?????
Now I'm sorry I sold my H&C distributor.
|
01-15-2014, 07:24 PM | #91 | |
Member
Join Date: Oct 2013
Location: Reno
Posts: 59
|
Re: Harmon Collins Rotors ?????
Quote:
|
|
01-15-2014, 07:25 PM | #92 |
Member
Join Date: Oct 2013
Location: Reno
Posts: 59
|
Re: Harmon Collins Rotors ?????
|
01-15-2014, 08:16 PM | #93 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,436
|
Re: Harmon Collins Rotors ?????
It look like some old Harmon & Collins distributors will be flying high, mighty, & handsom pretty soon.
|
01-15-2014, 08:33 PM | #94 |
Senior Member
Join Date: May 2010
Location: FP, NJ
Posts: 2,770
|
Re: Harmon Collins Rotors ?????
Interesting. Most of the pictures show the "top" side of the rotor, the one with the ejector pins. The fins on that side look to have very little draft. Is that the feature that's hanging up in the mold? There was one picture back at the beginning of the thread showing the "bottom" and the bosses there appear to have a heavy draft angles on the outside. They shouldn't be causing problems. Are there problems with the ID's in those bosses?
__________________
Don't never get rid of nuthin! |
01-15-2014, 09:13 PM | #95 |
Senior Member
Join Date: Jan 2011
Location: west bend wi
Posts: 314
|
Re: Harmon Collins Rotors ?????
They look GREAT! Sorry you are having trouble getting them out, but you will figure it out Im sure! I am ready when you are----Thanks
__________________
I am usually relatively happy------Gary |
01-15-2014, 09:22 PM | #96 | |
Member
Join Date: Oct 2013
Location: Reno
Posts: 59
|
Re: Harmon Collins Rotors ?????
Quote:
|
|
01-15-2014, 09:43 PM | #97 |
Senior Member
Join Date: May 2010
Location: Oakdale,Ca
Posts: 1,323
|
Re: Harmon Collins Rotors ?????
Turlock swapmeet is coming up...I'm not too far away, and will be in Turlock on Sunday of the meet (but not at the SM)...anyway, if anyone going there, and assuming DF has some ready to go, to save multiple shipping cost he could send them to me and I could deliver on Sunday, if it helps someone save a few bucks here and there, as I know a lot of Barners go to Turlock.
Just trying to do my part to help! |
01-16-2014, 05:39 AM | #98 |
Senior Member
|
Re: Harmon Collins Rotors ?????
First class job .
|
01-20-2014, 10:48 PM | #99 |
Member
Join Date: Oct 2013
Location: Reno
Posts: 59
|
Re: Harmon Collins Rotors ?????
Ladies & Gentlemen, you asked for it - ya got it! Here's the first rotor off the production table. I will continue this week and see if we can start shipping end of next week. PM me if you'd like a pair. (Gotta sell in pairs....i'm a Po' boy
ENJOY... Last edited by DzusFast; 01-20-2014 at 11:54 PM. |
01-20-2014, 11:23 PM | #100 |
Senior Member
Join Date: Jan 2011
Location: west bend wi
Posts: 314
|
Re: Harmon Collins Rotors ?????
i am ready anytime!
__________________
I am usually relatively happy------Gary |
|
|
Sponsored Links (Register now to hide all advertisements) |
|