|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-05-2017, 05:41 PM | #1 |
Member
Join Date: Jan 2017
Location: INDIANA
Posts: 98
|
Should I be concerned using a two-post lift on a Model A
Recently I had a gentleman PM me here on fordbarn forum with a concerning question asking if it was safe to lift my 31 Model A Truck using a two-post lift.
I for one never gave it any thought when lifting my truck I never realized there was possibly an issue lifting the truck with a two-post lift. Does anyone in the FordBarn Forum know of any issues. I would definitely like to know obviously I don't want any problems i.e. frame splitting at the cowl with front end separating falling forward.. Any and all advice or experience would be greatly appreciated. Thanks |
02-05-2017, 05:46 PM | #2 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: Should I be concerned using a two-post lift on a Model A
Well if your lifting up a rotted out frame any car can split, even a modern.. if done properly its perfectly safe. I spread the front arms out to the rear motor mount area and the rear arms to where the muffler clamp bolts to the frame. This gives you a nice stabil spread
These are 1 ft adapters under adjustable feet Last edited by Mitch//pa; 02-05-2017 at 05:57 PM. |
Sponsored Links (Register now to hide all advertisements) |
|
02-05-2017, 05:56 PM | #3 |
Member
Join Date: Jan 2017
Location: INDIANA
Posts: 98
|
Re: Should I be concerned using a two-post lift on a Model A
Well that's what I thought also but being new to the model a world I wasn't positively sure after that question was posed to me.
I definitely took my time and lined everything up properly to be safe anyway. This truck being a Georgia truck has very little rust if any anywhere never any patches in the body or bed, frame looks great but I was concerned |
02-05-2017, 05:57 PM | #4 |
Member
Join Date: Jan 2017
Location: INDIANA
Posts: 98
|
Re: Should I be concerned using a two-post lift on a Model A
Nice pic from Down Under
|
02-05-2017, 05:59 PM | #5 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: Should I be concerned using a two-post lift on a Model A
It does take me a good 15-20 minutes to set it the way i want. Depending on the job being performed sometimes i use the 4 post
|
02-05-2017, 06:36 PM | #6 |
Senior Member
Join Date: May 2010
Location: Denville NJ
Posts: 964
|
Re: Should I be concerned using a two-post lift on a Model A
Sponsored Links (Register now to hide all advertisements)
Mitch, did you make those extensions?
__________________
Model A Ford Club of New Jersey http://www.mafcnj.org Model A Pick Up Owners and Enthusiasts https://www.fordbarn.com/forum/group.php?groupid=5 |
02-05-2017, 07:06 PM | #7 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: Should I be concerned using a two-post lift on a Model A
Ed
The adapters came with the challenger CL lifts. Four-- 6 inch and two 1 ft'ers per lift The six inchers can be stacked to 1ft |
02-05-2017, 07:46 PM | #8 |
Senior Member
Join Date: May 2010
Location: NC
Posts: 2,975
|
Re: Should I be concerned using a two-post lift on a Model A
It will be fine, have been lifting my A,s with a 2 post for 17 years. works great I do like Mitch.
|
02-06-2017, 12:43 AM | #9 |
Member
Join Date: Jan 2017
Location: INDIANA
Posts: 98
|
Re: Should I be concerned using a two-post lift on a Model A
Thanks for the advice my lift also came with extender lifts . I didn't have to make up anything special it also took me closer to a half an hour to get it figured out but lifted very level
|
02-06-2017, 08:49 AM | #10 |
Senior Member
Join Date: Jan 2017
Location: Maryhill Ont Canada
Posts: 834
|
Re: Should I be concerned using a two-post lift on a Model A
Many years ago, the Toyota dealership in Walkerton Ont had the owners model A fall off the inground hoist. It had just been restored. The guys in the back shop were scared crapless to let him know what happened. When Harold came out to the shop to see his car laying on it's side, he asked if anyone got hurt?. Finding out that there were no injuries, he said clean it up, and returned to his office. He recanted this story to me on numerous occasions. He was most concerned that no one got hurt. There was no sense in getting upset. The damage was done. He passed away Sept. 11 2004. And is missed still by my family. Jeff
|
02-06-2017, 10:30 AM | #11 | |
Senior Member
Join Date: May 2010
Location: Lewisburg,PA
Posts: 938
|
Re: Should I be concerned using a two-post lift on a Model A
Quote:
|
|
02-06-2017, 10:41 AM | #12 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: Should I be concerned using a two-post lift on a Model A
He had the proper AGREED value...its worth more dead than alive...
|
02-06-2017, 12:11 PM | #13 |
Senior Member
Join Date: May 2010
Location: Lewisburg,PA
Posts: 938
|
Re: Should I be concerned using a two-post lift on a Model A
|
02-06-2017, 12:16 PM | #14 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: Should I be concerned using a two-post lift on a Model A
|
02-06-2017, 01:44 PM | #15 |
Senior Member
Join Date: Jan 2016
Posts: 2,103
|
Re: Should I be concerned using a two-post lift on a Model A
I have a 2 post Atlas and it works fine.
Same positioning as Mitch and I use an extra 1 - 1/2 inch extender in the rear to level out the car because the rear of the frame goes up near the shocks. With the car up and a level on the running board it is perfectly straight. A little tricky and timing consuming to get all 4 aligned so that they don't bother the brake arms. I have splash pans so the front arms can not go as forward as I would like. But, it beat a creeper. |
02-07-2017, 10:14 PM | #16 |
Member
Join Date: Jan 2017
Location: INDIANA
Posts: 98
|
Re: Should I be concerned using a two-post lift on a Model A
My lift is also a Atlas 2 post lift I feel it works great but only was concerned when another gentleman stated it was not safe.
I took all precautions and used supports under the car for the first couple of days just to be sure I've had no issue |
02-08-2017, 12:57 AM | #17 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Should I be concerned using a two-post lift on a Model A
The last place I worked had a very unsafe 2 post lift for me to work under. The concrete was thin and weak, so the lift couldn't properly be anchored. I could grab the front bumper of a car on the hoist and push up and down and watch the base of the lift move on the weak concrete. If the car would have been off center by a foot or more, I wouldn't doubt that the lift and car both would have fallen over. I was glad to get out of there.
|
02-08-2017, 02:04 PM | #18 |
Senior Member
Join Date: May 2010
Location: new britain,ct 06052
Posts: 9,390
|
Re: Should I be concerned using a two-post lift on a Model A
When you talked about 2 post lifts I thought you were referring to the old post lifts that were underground. One for the front and one for the rear. Not the new above ground lifts.
Paul in CT I go back a long time. |
02-08-2017, 07:08 PM | #19 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: Should I be concerned using a two-post lift on a Model A
[QUOTE=1931 flamingo;1426630]When you talked about 2 post lifts I thought you were referring to the old post lifts that were underground. One for the front and one for the rear. Not the new above ground lifts.
Paul in CT I go back a long time.[/QUOTE Those would work good on an A, as the brake rods wont apply the brakes, and much easier to do adjustments... |
02-08-2017, 07:20 PM | #20 | |
Senior Member
Join Date: May 2010
Location: NC
Posts: 2,975
|
Re: Should I be concerned using a two-post lift on a Model A
[QUOTE=Mitch//pa;1426807]
Quote:
|
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|