Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-24-2014, 03:45 PM   #1
Slik
Member
 
Slik's Avatar
 
Join Date: Aug 2014
Location: La Plata, MD
Posts: 60
Default Ooooh that smell

So.... Pulled my gas gauge and surprisingly after 30 years of sitting in the tank - with gas, the cork was completely intact but it looks like someone coated it with varnish or something.
Anyway - with the new gas and everything I figured better safe then sorry and I orders a gas gauge float from Synder's. Problem was the little washer on the end AND the float was just about a 1/4 inch to big, and I didn't want to attempt to re-bend the wire with fear of breaking it.
I decided I'd take 1/4 off with a knife. Knife went thru pretty easy but the center of these things are kind of brittle. Worst part was the smell !!!! Not sure what they make these out of but the only way I can describe it is - feed your dog anchovies and ice cream, recycle that outcome, burn it and then compress it into a shape similar to a float.
The smell is literally lingering in my nostrils ! I've tried trimming the hairs, blowing my nose and even snorting some water. It's some ugly smelling nasty stuff. Anyone know what they are made of ? I'd love to leave some on my neighbors front porch
Slik is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:55 AM.