1934 HELP...windshield regulator instalation?? post pics please?

[Six Pack to go]

Trying to figure out how the stock window regulator goes on my 1934 Ford coupe...please post pics if you got em...Thanks ~Eric

[DICK SPADARO]

There are 11 posts answering this question on the HAMB post!

[Six Pack to go]

Still no pics of a stock installed one...And I bought itfrom you! So mabe I should take my business elsewhere!

[Six Pack to go]

Figured out the problem, my dash was filled! There is no whole for the handle....mabe its a roadster dash, I dont know.

[DICK SPADARO]

If you bought it from me and have an installation problem you can always call 518-861-5367 M-F 9-5 ET for an answer. The pictures addressing your other post showed you how it mounts to the cowl. If the dash board does not have a hole for the regulator to pass thru then it must be determined if it is a cabriolet dash or someone just welded the hole up because the car had a fixed windshield before you got it. Cabriolets had no hole and dashes are hared to find. Doubtful its a roadster dash they are totally different than a closed car dash. If you are still having problems call for assistance.

[Six Pack to go]

Sponsored Links (Register now to hide all advertisements)

This is the dash in my coupe hence the problem I was having....mabe someone can identify what type of 33/34 it may have come from....its an old hot rod and Im no expert...that was the reason for the post. Ford Barn has the purist and I thought someone could help me...that is the reason for the double post. I couldnt figure out where the handle went. Now I know that this dash is not origional to my coupe or someone filled the hole...thanks for your assistance. ~Eric

[David J]

Originally Posted by Six Pack to go

This is the dash in my coupe hence the problem I was having....mabe someone can identify what type of 33/34 it may have come from....its an old hot rod and Im no expert...that was the reason for the post. Ford Barn has the purist and I thought someone could help me...that is the reason for the double post. I couldnt figure out where the handle went. Now I know that this dash is not origional to my coupe or someone filled the hole...thanks for your assistance. ~Eric

Eric , Left two pics are 34 dlx and the other two are 33 dlx . Your dash looks to be a standard { no ashtray or cigar lighter } but it has had work done to it . I took the handle off the 33 so you can see the hole is oblong to allow for shaft movement as you crank the windshield in and out . If interested I can cut this segment out of a cannibalized dash . David J

[Six Pack to go]

Thanks for the pics, I think my dash was filled some time ago...I will make it work. Thanks ~Eric