|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-12-2022, 10:50 PM | #1 |
Junior Member
Join Date: Jan 2022
Posts: 6
|
57 Ford Fairlane master cylinder non power
Any help in finding the correct master cylinder for a 57 Fairlane. Ever unit i have purchased on review on line will not match the bolt holes on the firewall. All units were to fit the 57 Fairlane. Any unit with the 18000 series will not match bolt location spacing on the firewall. ANY HELP WOULD BE NICE
|
07-12-2022, 11:13 PM | #2 |
Senior Member
Join Date: Aug 2020
Posts: 442
|
Re: 57 Ford Fairlane master cylinder non power
If you are replacing the OEM single-circuit, single-reservoir master cylinder, it should not be unlike the one that came on my 55 Tbird. There are four mounting tabs, and I think Ford continued to use the same master cylinder until 1967. If your master cylinder is not original, it probably has 2 mounting tabs. It should be easy to figure out which of the 4 holes on the firewall to mount it to (should be the lower 2) in order for the push rod to pass through the larger center hole to be connected to the brake pedal. You'll need to insert bolts in the upper, unused holes that screw into the brake-pedal hanger.
|
Sponsored Links (Register now to hide all advertisements) |
|
07-12-2022, 11:37 PM | #3 |
Senior Member
Join Date: May 2010
Location: Granite City, Illinois
Posts: 3,008
|
Re: 57 Ford Fairlane master cylinder non power
It should be the easiest master cylinder in the world to find. They used them from at least 1954 thru at least the mid '60's in Ford cars and trucks.
|
07-12-2022, 11:47 PM | #4 |
Senior Member
Join Date: Aug 2020
Posts: 442
|
Re: 57 Ford Fairlane master cylinder non power
I just looked up a 57 Fairlane master cylinder on RockAuto; it looks just like my 55 MC (manual brakes) and even has the same size 1-inch piston. Maybe your brake-pedal hanger is not aligned with all four firewall holes, in which case you won't be able to install all four bolts.
If you still have trouble, post a photo of the master cylinder that you're trying to install. |
07-13-2022, 12:14 AM | #5 |
Senior Member
Join Date: Feb 2014
Location: West Hempstead, New York
Posts: 167
|
Re: 57 Ford Fairlane master cylinder non power
Dennis,
Too many people " guessing " , and incomplete Chineseum listings on the USELESS internet..... There are TWO (2) Master Cylinders for *** 1957 - 1959 *** ONLY *** ( N O T utilized into the 1960s on Cars or Trucks....) The spread / bolt pattern from the Upper to the Lower Bolts are 2 1/4 " and 1 1/2 ", And I am betting that you have the far more difficult to obtain 1 1/2 " application..... I have them Brand New / NO Core Required..... P.M. me, if interested.... Craig ..... |
07-13-2022, 02:44 AM | #6 | |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: 57 Ford Fairlane master cylinder non power
Sponsored Links (Register now to hide all advertisements)
Quote:
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
|
07-13-2022, 10:29 AM | #7 |
Senior Member
Join Date: Aug 2020
Posts: 442
|
Re: 57 Ford Fairlane master cylinder non power
How could Dennis read replies without the internet? This site would not exist without it.
|
07-13-2022, 04:43 PM | #8 | |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: 57 Ford Fairlane master cylinder non power
Quote:
Are you saying there is a different mounting pattern between MANUAL (B7A 2140-A) and POWER (B7A 2140-B)? Are yours FORD NOS or period aftermarket?
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
|
07-14-2022, 01:47 PM | #9 |
Senior Member
Join Date: May 2010
Location: Lynden, Wa
Posts: 3,552
|
Re: 57 Ford Fairlane master cylinder non power
He has the one I have on my wagon sounds like. Yes there are two different sized MC's (why I don't know). I actually found mine through a NAPA dealer.
Mike
__________________
1930 TownSedan (Briggs) 1957 Country Sedan |
07-14-2022, 02:16 PM | #10 |
Senior Member
Join Date: Aug 2020
Posts: 442
|
Re: 57 Ford Fairlane master cylinder non power
The stock, non power-assist master cylinder has a 1-inch bore. When I converted to Wilwood Dynalite 4-piston front discs, both Wilwood and Dave (Drop 'em, Stop 'em) recommended 15/16ths (still manual).
|
07-15-2022, 10:14 AM | #11 | |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: 57 Ford Fairlane master cylinder non power
Quote:
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
|
07-15-2022, 08:36 PM | #12 | |
Junior Member
Join Date: Jan 2022
Posts: 6
|
Re: 57 Ford Fairlane master cylinder non power
Quote:
|
|
07-15-2022, 08:55 PM | #13 |
Junior Member
Join Date: Jan 2022
Posts: 6
|
Re: 57 Ford Fairlane master cylinder non power
More information that might help other down the road the 1 1/2 inch bolt pattern has a Ford casting numberAJ2155A and is a FOMOCO MASTER. OTHER MARKINGS 1 INCH BORE R1 and F DATED 9-27
|
07-15-2022, 11:53 PM | #14 | |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: 57 Ford Fairlane master cylinder non power
Quote:
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
|
07-16-2022, 12:39 AM | #15 | |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: 57 Ford Fairlane master cylinder non power
Quote:
More info -
AJ-2155-A is the CASTING ID NO for the MC HSNG only. B7A 2140-A is the FORD SERVICE PART (OEM) NUMBER.
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) Last edited by KULTULZ; 09-22-2022 at 01:31 AM. Reason: OFFER BETTER ILLUSTRATIONS |
|
07-16-2022, 07:29 PM | #16 |
Junior Member
Join Date: Jan 2022
Posts: 6
|
Re: 57 Ford Fairlane master cylinder non power
I was not allow to PM because I have not had a least 10 postings. I did try and was not allow but did get a message why i was not allow. i don't how to reach out about the price and how to order the 57 1 1/2 master cylinder
|
07-16-2022, 07:51 PM | #17 |
Senior Member
Join Date: May 2012
Location: Middle TN
Posts: 1,060
|
Re: 57 Ford Fairlane master cylinder non power
Here's a phone number for Mobile Parts: 516 485-1935. The guy's name is Craig Studnick.
__________________
Often wrong but never in doubt. |
07-16-2022, 07:51 PM | #18 |
Junior Member
Join Date: Jan 2022
Posts: 6
|
Re: 57 Ford Fairlane master cylinder non power
i am sure the Ford Barn has its reasons for not allowing new members to PM, but if that the cast when I did try and sent a message does the staff forward my PM ?
|
07-16-2022, 07:53 PM | #19 |
Senior Member
Join Date: May 2012
Location: Middle TN
Posts: 1,060
|
Re: 57 Ford Fairlane master cylinder non power
As far as I know the staff will not forward a PM.
__________________
Often wrong but never in doubt. |
07-17-2022, 01:19 AM | #20 |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: 57 Ford Fairlane master cylinder non power
If the phone no shows no result, I will PM him and inform him you are interested.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|