The Ford Barn

burner31 · 12-23-2014, 02:36 PM

Why does my engine have no star?
Replacement engine maybe? Re-stamped at factory? Worker forgot to use the star stamp? Other?

James Rogers · 12-23-2014, 02:45 PM

Typical restamp. Probably done to match a title. Not done at factory or most likely any Ford dealer.

Tom Wesenberg · 12-23-2014, 03:58 PM

Here's what an original number should look like. It should start with an "A" and have a star at each end, and it was always stamped into the original rough cast, not a machined surface.

Purdy Swoft · 12-23-2014, 04:04 PM

Probably a rebuilt engine that was installed at some point in time. As stated above, it was more than likely renumbered to match the title and they didn't have a star or A stamp .

Keith True · 12-23-2014, 05:47 PM

Sponsored Links (Register now to hide all advertisements)

Take a good look at Toms engine number,then yours.His is still in the original rough texture,yours looks smooth,from being ground off.Yours has crisp edges on the edges of the pad from the grinding,Toms has soft blurry edges from the casting molds.

12-23-2014, 02:45 PM	#2
James Rogers Senior Member Join Date: May 2010 Location: Asheville,NC Posts: 3,104	Re: Why no "star" on my engine Typical restamp. Probably done to match a title. Not done at factory or most likely any Ford dealer. __________________ http://www.model-a-ford-4bangers.com/

12-23-2014, 04:04 PM	#4
Purdy Swoft Senior Member Join Date: May 2010 Location: Alabama Posts: 8,099	Re: Why no "star" on my engine Probably a rebuilt engine that was installed at some point in time. As stated above, it was more than likely renumbered to match the title and they didn't have a star or A stamp .

12-23-2014, 05:47 PM	#5
Keith True Senior Member Join Date: May 2010 Location: Epping N.H. Posts: 2,991	Re: Why no "star" on my engine Sponsored Links (Register now to hide all advertisements) Take a good look at Toms engine number,then yours.His is still in the original rough texture,yours looks smooth,from being ground off.Yours has crisp edges on the edges of the pad from the grinding,Toms has soft blurry edges from the casting molds.