|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-09-2016, 08:16 PM | #1 |
Member
Join Date: Jun 2012
Location: Dexter, Michigan
Posts: 87
|
Need '49 Mercury carb spec
Anyone out there got a '49 Mercury shop manual and is willing to look up a spec for me? I need the carburetor float setting for the Holley 885FFC carb. Appreciate any help someone can give.
|
03-09-2016, 08:45 PM | #2 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,949
|
Re: Need '49 Mercury carb spec
This may help.
http://www.oldcarmanualproject.com/m...rc4951-001.jpg and this. http://www.oldcarmanualproject.com/m.../885/index.htm I looked in my 49-51 Merc Manuals and they don't give a specific measurement. All they do is tell you to use the special tool "Fuel Level gauge 9550-B". |
Sponsored Links (Register now to hide all advertisements) |
|
03-09-2016, 08:57 PM | #3 |
Senior Member
Join Date: Jun 2010
Location: Detroit suburb, MI
Posts: 3,706
|
Re: Need '49 Mercury carb spec
I have a Holley manual and it says the float setting for '49 to '51 Mercury with the Holley 885FFC carb is 7/32" from the bowl gasket surface to the top of the float at the toe of the float.
Sal |
03-10-2016, 01:24 PM | #4 |
Member
Join Date: Jun 2012
Location: Dexter, Michigan
Posts: 87
|
Re: Need '49 Mercury carb spec
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|