|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-17-2018, 05:46 PM | #1 |
Senior Member
Join Date: Apr 2015
Location: Saint Cloud Mn
Posts: 745
|
Model A engine cam bearing dimension
Can someone give me the model A engine block cam bearing dimension.
Cavity bore diameter. Thanks. Daren |
09-17-2018, 10:31 PM | #2 |
Senior Member
Join Date: May 2010
Location: albany
Posts: 466
|
Re: Model A engine cam bearing dimension
going from memory here but 1.560 sounds right
|
Sponsored Links (Register now to hide all advertisements) |
|
09-17-2018, 11:01 PM | #3 |
Senior Member
Join Date: May 2010
Location: on the Littlefield
Posts: 6,159
|
Re: Model A engine cam bearing dimension
Sponsored Links (Register now to hide all advertisements)
new cam diameter of 1.560 ---from bill stipe site a low mileage block that I took apart that still has machining marks has .0015 clearance with original cam that shows no wear a center cam bearing with .005 clearance has the same "open" cross section as the oil feed to the valve chamber ---- |
|
|
Sponsored Links (Register now to hide all advertisements) |
|