|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-18-2015, 08:43 PM | #1 |
Member
Join Date: Jul 2014
Posts: 43
|
HELP for a Rookie!! oil press and ign timing
I put a 0-15 psi gage in the port by the pump housing---at idle 0 psi, as I rev it goes up, then back to 0 at idle-----?
Installed a B dist. with centrif advance---Idle timing should be??--I installed a degree indicator and marked TDC |
05-18-2015, 08:52 PM | #2 | |
Senior Member
Join Date: May 2010
Location: Young Harris, GA
Posts: 1,821
|
Re: HELP for a Rookie!! oil press and ign timing
Quote:
I don't know what to tell you about the B Dist on an A engine. Suggest you put on a B timing cover and time it per B engine instructions.
__________________
Jim Cannon Former MAFCA Technical Director "Have a Model A day!" |
|
Sponsored Links (Register now to hide all advertisements) |
|
05-18-2015, 10:37 PM | #3 |
Senior Member
|
Re: HELP for a Rookie!! oil press and ign timing
Sponsored Links (Register now to hide all advertisements)
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
|
|
Sponsored Links (Register now to hide all advertisements) |
|