lots of 57 Ford Parts

[venturesomerite]

I will be adding more as I am able. I have a lot I need to sort through, picture and post. If you need something I haven't listed yet, shoot me a PM asking.






DO NOT POST IN THIS THREAD, SENT A PM IF YOU ARE INTERESTED IN SOMETHING.














I have doubles and even tripples of alot of things, so it's not just what you see on the car, so feel free to ask. I will take pictures of anything you like. You are more than welcome to set up and time and date with me to look at anything you like.




I will be keeping the motor whole, and selling it whole. I will keep it able to run so I can demo it to someone, aka no manifolds, carb, bellhousing, intake etc.


Parts start at $5 and on up. Willing to deal if you want to get more than one thing. Just let me know what you need, and shoot and offer.


I will take paypal, USPS money order, or CASH in hand. No checks, no dibs, no bs.

I AM OPEN to trades, tel me what you want, and whatcha got. Worst I can say is no. I'd be open to tool, auto parts (hot rod, custom, etc) and other non car related things, give it a try, you never know. I have a 56 fairlane 500 and 56 vicky.

I do need some sheet metal for the vicky (floor, rocker, quarter, fender, door patches), a fuel cell (16-25 gal), a set of seat belts to put in it (black) and probably some other stuff too. I also need a single gauge cup for a 2 1/6" gauge.


The car and most parts are located in Stratford, CT. Some parts are located in Hamden CT, I can move parts to Either or if it gets it closer to you, except for an engine.





I will be listing individually as I can, but for now here are some shots of the whole car I am parting. Please understand, I have ALOT to sort through, and alot on my plate. Getting things up here will take me some time.


There are a lot more parts that are not listed out here. Like 12+ hub caps, spindles, drums, a arms, steering components, another front half of the frame other than the one I already sold, vent glass (like 6 or so) and a whole bunch more.








57 292 Yblock - Complete carb to pan, no air cleaner. Comes with dizzy, water pump, manifolds,coil, wires, plugs, and motor mounts. Accel pump needs a new gasket, it leaks. Alternator doesn't work. Running condition. - $700

57 3 speed tranny - Shifted for a driveway test run. Have never driven on it. $250

IF YOU WOULD LIKE THE MOTOR & TRANNY - $850




57 Radiator - No leaks, pet cock worked great to drain the coolant - SOLD
(x2) 57 Front bumper - $150
(x2) 57 Rear bumper - BOTH SOLD
57 Custom 300 complete pass rear door (glass, knobs, handles, panel etc - only whole) - $120
57 Custom 300 complete driver rear door(glass, knobs, handles, panel etc -only whole) -$120
57 Fairlane PASS fender -SOLD
57 Fairlane DRIVER fender -SOLD
57 Cusom 300 Driver Fender - SOLD
57 Fairlane Hood -SOLD
57 custom 300 hood - $125
57 custom 300 trunk lid - -SOLD
57 Custom 300 trunk lid lock and emblem - SOLD
57 Fairlane trunk lid - only good for the outter skin - -SOLD
(x2) 57 trunk hinges - $25 pair
(x2) 57 hood hinges - -SOLD
57 trans support - $40
57 custom 300 quarters (cut from a car) some rust at the bottoms -SOLD
57 custom 300 front half of the frame (a arms, spindles, coils, drums ) - SOLD
57 custom 300 front door glass (D+P) - $40 ea
57 straight six complete head and lifter (has one broken rocker) - SOLD
57 Straight six cam shaft -SOLD
57 straight six motor mounts - SOLD
57 straight six torque converter and bell housing - $120
61 (ish) ford auto tranny (fluid cooled type, needs a cooler, comes with bell housing and converter) - $250
57 custom 300 rear end (complete drum to drum, spins free, open rear, gears unknown - was mated to a straight six car) - SOLD
57 custom 300 grille (both sides) -SOLD
57 Fairlane grille (both sides, driver side needs mount repair) $30
57 Fairlane front windshild (minor fog in corners, can take pics - LOCAL PICK UP ONLY) - $125
57 Fairlane rear windshild - (LOCAL PICK UP ONLY)- $150
57 fairlane inner fenders (P+D) - BOTH SOLD
57 Fairlane Front Bench seat - SOLD
57 Fairlane rear bench (upper and lower) $100
57 Fairlane Antenna (don't know if it is stock or not) SOLD
57 fairlane 4 dr drive shaft, includes u joints of unknown condition and slip yoke for 3 speed manual tranny - 16 Splines on slip yoke) - $125
57 Fairlane 3 speed manual tranny - for 16 spline slip yoke - $200
57 Fairlane complete dash - Some of it sold, to many pieces to list individually
57 fairlane three on tree column - $125
57 fairlane rear view mirror - -SOLD
57 Steering wheel with horn ring $50
57 horn ring - $20
57 Rear end complete drum to drum - SOLD
57 Fairlane leaf springs (as a set)- $80
57 Custom 300 leaf springs (as a set) --SOLD
57 Fairlane gas tank, cap and straps (needs a cleaning and coating- CANNOT SHIP THIS ) -SOLD
57 Fairlane rear License plate bracket - -SOLD
57 Fairlane 4 dr B pillar Interior upper and lower trim (both sides) $50 ea
57 Fairlane rear winshield trim - -SOLD
57 fairlane front windshield trim - -SOLD
57 Fairlane Town Sedan or fairlane side trim (the trim on the sides of the grey/white car shown)- $200

[venturesomerite]

Skirts, driver side needs the lip repaired. - $75 plus ship




Pass side tail light housing $ - 50 plus ship





Driver side taillight housing - $50 plus ship





Intake #1 - $115 plus ship






Instrument cluster #1 - $35

[steve fritz]

I would be interested in the exhaust manifolds, intake manifold, distributor, heater blower motor with cage, throttle linkage, from carb to pedal., instrument cluster, dash clock. Let me know total price, I can figure shipping if you use Fed Ex.
Thanks,
Steve

[venturesomerite]

Glove Box Cover #1 - $30 plus ship




Speaker Grill # 1 - $10 plus ship




Speedo Cable with gear #1 - $15 plus ship




Blower motor #1 (I hooked it to a battery and both speeds work, runs quiet) Just needs to be cleaned up - $20 plus ship




Wiper, R air, Choke panel and controls with cables - $20 plus ship






Heater Controls - $15 plus ship




Hood release, cable, bracket, latch - $20 plus ship




Ignition, Lights, L air controls and panel - Missing light switch, no key for ignition - $15 plus ship




Seat adjuster Knob (located on driver's side front seat) - SOLD

[steve fritz]

OK, if you want to sell those, email me direct at [email protected] Attach some pictures if its not too much trouble and we can deal on what you got. Thanks,
Steve

[wvgunner]

Sponsored Links (Register now to hide all advertisements)

What size engine? I'm looking for exhaust manifolds for 292 YBlock. Thanks.

[venturesomerite]

41 Ford hub caps - SOLD

[Clutchburner]

I need the seat adjuster knob.

[venturesomerite]

57 Ford windshield outter trim - $150 + ship

[venturesomerite]

Here is are some current pictures of the car, every thing you see missing if off, and ready for sale. PM for specific pictures of things. Although you can't see, the rear bumper and tail light housings, and gas tank are off as well.






Also, have this front frame with sway bar, coils, arms and complete brakes. Will sell it whole or just what you need. Willing to cut this half frame up too if you just need a certain part. $325 for the whole thing, or we can work out a deal for what you want.









Also, Custom Cruiser tires on 57 ford rims If I recall corectly on rim looked different than the others (trim rings shown not included). About 200 mile on them. $400

[venturesomerite]

reserved for more part pictures

[venturesomerite]

Can some one please delete the posts out of this thread (that aren't mine), along with this one so I can post more pictures all together?

[venturesomerite]

updated with sold parts.

Will also be adding 12 rims, 8 with crap tires, 4 with brand new (200 miles) 3" white walls.

Gotta get pictures.

[venturesomerite]

If you need something, let me know. Make an offer, come look, let's work something out.

[venturesomerite]

bump

[venturesomerite]

Bttt

[venturesomerite]

BUMP, tell me what you want and make an offer. I'll also barter for tools, a project motorcycle, quad, or maybe some FE parts, just try me. You never know.

[venturesomerite]

Bump.....

[venturesomerite]

Updated, some parts sold. There is much more than I have listed individually, so ask if you need it.

[venturesomerite]

bump

[venturesomerite]

bump

[venturesomerite]

BUMP- Front clip sold

[dav]

I'm in need of the front top windshield moulding for a 1957 Ford 2 door hardtop. Also the right side and left side air controls complete less bezels. or with bezels.Also need the L shaped left rear windshield piece. Can you give me a price on these parts plus shipping to zip code 02360

[venturesomerite]

Originally Posted by dav

I'm in need of the front top windshield moulding for a 1957 Ford 2 door hardtop. Also the right side and left side air controls complete less bezels. or with bezels.Also need the L shaped left rear windshield piece. Can you give me a price on these parts plus shipping to zip code 02360

I PMed you my number. Feel free to call, you can come look at the stuff in person if you'd like, never know what you need til you see it!

Brian

[venturesomerite]

everything is apart, the body is cut up (roof, pillars, jambs, quarters etc) and everything I have is tagged and priced, ready to go to swap meets. I will be at the Stafford Springs swap meet (oct 21) and if anything is left, the Lake compounce swap meet (nov 4).

Get it before the masses do.