The Ford Barn

BVZ24 · 05-19-2023, 08:31 PM

I am getting prepared to do a lower end rebuild this weekend. This is the first rebuild I am attempting. I ordered a set of rebabbited connecting rods and inspected them for obvious defects. All 4 connecting rod small ends have a groove cut in the middle between the two oil holes. 3 of the rods have a "C" shaped clip inserted in this groove and 1 is missing. What is the purpose and importance of this clip, and can I work around it being missing? Is it safe for the long term to install the rod as is without it, remove the other 3 clips, or should I contact customer service and postpone my rebuild?

The removed connecting rods do not have the groove and therefore do not have a clip that I can steal.

Will provide pictures as soon as I can

05-19-2023, 08:31 PM	#1
BVZ24 Member Join Date: Jul 2021 Posts: 32	Connecting rod Question I am getting prepared to do a lower end rebuild this weekend. This is the first rebuild I am attempting. I ordered a set of rebabbited connecting rods and inspected them for obvious defects. All 4 connecting rod small ends have a groove cut in the middle between the two oil holes. 3 of the rods have a "C" shaped clip inserted in this groove and 1 is missing. What is the purpose and importance of this clip, and can I work around it being missing? Is it safe for the long term to install the rod as is without it, remove the other 3 clips, or should I contact customer service and postpone my rebuild? The removed connecting rods do not have the groove and therefore do not have a clip that I can steal. Will provide pictures as soon as I can