09-14-2017, 06:52 PM | #1 |
Senior Member
Join Date: Mar 2015
Location: Greenville, SC
Posts: 1,099
|
What next
Bought a "running chassis" that isn't exactly running yet. The flywheel wheel housing was a different color so suspicion was in order. The housing was run out and an extra .025 at the 9 o'clock position. Removed housing and no gasket or shims. The crankshaft run-out was good. Put it back together properly and see what I have or have the housing measured and/or surfaced first?
John |
09-15-2017, 04:37 AM | #2 |
Senior Member
Join Date: May 2010
Location: Gwynn's Island Va
Posts: 1,389
|
Re: What next
Put it together and fire it up and see what you have. Motor could be a knocker or a good runner.
I've done this many times and it can save you Alot of time and energy. |
Sponsored Links (Register now to hide all advertisements) |
|
09-15-2017, 08:07 PM | #3 | |
Senior Member
Join Date: Mar 2015
Location: Greenville, SC
Posts: 1,099
|
Re: What next
Sponsored Links (Register now to hide all advertisements)
Any other opinions? Quote:
|
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|