|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-06-2016, 05:00 PM | #1 |
Senior Member
Join Date: Nov 2014
Location: Here I am in front of Todd's Grocery in 1931 selling Grit newspapers
Posts: 2,548
|
Rattle Rattle...where be the rattle???????
For the longest time there was a small rattle inside passenger side, couldn't find it. I thought maybe it was the GAV rod, seemed to subside when grabbed, even Larry thought it was. I had earlier took off the kick panel to install sound proofing pads, nothing there to rattle. Took Sarah out last weekend and it started up again. This time I reached over and pushed in lightly on the door panel, it quit. HA HA!!!!...got back and was about to remove the door panel and I said, do I really want to do this, go there and it might not go back on as easy as it might come off? I said...NO. So a closer visual inspection revealed.....no upper window slide cushion on...either side. Got replacements today from Bert's and.....not a squeak!!!! I'm beginning to become a full pledge 100% Model A Depot maintenance mechanic!!!!
__________________
"Bullshit and Brilliance Comes with Age and Experience" "Hey Lady, ya wanna buy a Grit?" "If you don't learn to laugh at trouble, you won't have anything to laugh at when you're old" Will Rogers |
10-06-2016, 05:34 PM | #2 | |
Senior Member
Join Date: Sep 2014
Location: Sunbury, OH
Posts: 295
|
Re: Rattle Rattle...where be the rattle???????
Quote:
|
|
Sponsored Links (Register now to hide all advertisements) |
|
10-06-2016, 06:22 PM | #3 |
Senior Member
Join Date: Nov 2011
Location: Dayton Oregon
Posts: 318
|
Re: Rattle Rattle...where be the rattle???????
I have so many rattles and thumps it sounds like the song wipe out as I go down the road
__________________
Hotrods don't have valve covers |
10-06-2016, 08:59 PM | #4 |
BANNED
Join Date: May 2010
Location: Michigan / Ontario border, Sarnia, Ontario. 50 miles from Detroit and 150 from Toronto.
Posts: 5,800
|
Re: Rattle Rattle...where be the rattle???????
If there are no rattles or funny noises you grabbed the keys to the wrong car. Can't be your Model A. Wayne
|
10-07-2016, 06:18 AM | #5 |
Senior Member
Join Date: Mar 2014
Location: Cleveland, Ohio
Posts: 2,763
|
Re: Rattle Rattle...where be the rattle???????
Great job!
__________________
-Mike Late 31' Ford Model A Tudor, Miss Daisy I don't work on cars --I'm learning about my Model A. Cleveland, Ohio |
10-07-2016, 06:32 AM | #6 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: Rattle Rattle...where be the rattle???????
Sponsored Links (Register now to hide all advertisements)
|
10-07-2016, 06:35 AM | #7 |
Senior Member
Join Date: May 2010
Location: St Charles , Missouri
Posts: 1,998
|
Re: Rattle Rattle...where be the rattle???????
Ed
Great job!!! I wil expect that Sarah wil be stone quiet when I ride in her next We're in our way back from Hershey for Bobs funeral tomorrow Chat soon ! Larry |
10-07-2016, 01:06 PM | #8 |
Senior Member
Join Date: Aug 2011
Location: Millbrae, CA
Posts: 507
|
Re: Rattle Rattle...where be the rattle???????
Finding a rattle and then eliminating it is both challenging and rewarding. Once I get one done I look for another. My cabriolet is now much quieter now that it is painted and upholstered, but still more to get rid of. Dynamat covering the inside of the body sheet metal helped a lot.
The lever on my generic turn signal vibrates a sound while going down the road. I have not got that one stopped yet. |
10-07-2016, 11:56 PM | #9 |
Senior Member
Join Date: Dec 2013
Location: Hershey, Pa.
Posts: 102
|
Re: Rattle Rattle...where be the rattle???????
I got my "Mollie May" 1930 Tudor Sedan this past March. A couple months ago it started rattling from up under the hood somewhere. It would only do it after I was driving it an hour or so. It was loud and it was the sound like two pieces of metal rubbing together so I took a can of WD-40 and sprayed both left and right side cab mount to frame and so far cross my fingers it seemed to do the trick! Is there a 3rd.mount somewhere under there so I can get that lubed also? Jim
|
10-08-2016, 02:32 PM | #10 |
Senior Member
Join Date: Nov 2014
Location: Here I am in front of Todd's Grocery in 1931 selling Grit newspapers
Posts: 2,548
|
Re: Rattle Rattle...where be the rattle???????
Well Larry, there couldn't have been a better day for a funeral, if there has to be one and I'm sure Bob had a long line of Model As following him to the graveside. RIP Bob..............
__________________
"Bullshit and Brilliance Comes with Age and Experience" "Hey Lady, ya wanna buy a Grit?" "If you don't learn to laugh at trouble, you won't have anything to laugh at when you're old" Will Rogers |
10-08-2016, 03:15 PM | #11 |
Senior Member
Join Date: Nov 2014
Location: Here I am in front of Todd's Grocery in 1931 selling Grit newspapers
Posts: 2,548
|
Re: Rattle Rattle...where be the rattle???????
Still have a GAV rod rattle.....................it's even more noticeable now with the door rattle gone.
__________________
"Bullshit and Brilliance Comes with Age and Experience" "Hey Lady, ya wanna buy a Grit?" "If you don't learn to laugh at trouble, you won't have anything to laugh at when you're old" Will Rogers |
10-08-2016, 04:47 PM | #12 |
Senior Member
Join Date: May 2010
Location: St Charles , Missouri
Posts: 1,998
|
Re: Rattle Rattle...where be the rattle???????
Just got back from the funeral - long day and sad but a great day too. Lots of memories for sure . We had lots of A's , one guys starter locked up so that only took me 30 seconds , another blew a head gasket on the way there so I ended up taking his back by trailer afterwards . I drove Bobs fordor and of course we had a horn send off at graveside
Get that rod rattle fixed now!!! All the best! Larry |
10-08-2016, 10:05 PM | #13 |
Junior Member
Join Date: Mar 2011
Posts: 22
|
Re: Rattle Rattle...where be the rattle???????
Just remember, there was a small number of Model A's that used the leftover rattles from the Model T! Henry couldn't sell all of them to Chevrolet!
|
10-12-2016, 07:14 PM | #14 |
BANNED
Join Date: Feb 2015
Location: East Central Iowa
Posts: 1,275
|
Re: Rattle Rattle...where be the rattle???????
Spark and throttle rods hitting the inside of the steering column tube? Original installation had felt washers.
__________________
Good enough.. Isn't. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|