11-23-2019, 10:42 AM | #1 |
Member
Join Date: Nov 2017
Location: Terre Haute, Indiana
Posts: 90
|
Door glass
please explain door window assembly on a 29 82a door.
is it window 1st then channel felts 2nd and then regulator? |
11-23-2019, 11:41 AM | #2 | |
Senior Member
Join Date: May 2010
Location: Boulder, CO
Posts: 559
|
Re: Door glass
Sponsored Links (Register now to hide all advertisements)
Quote:
Bill, The door glass runs must be installed/fit first. Then the runs must be lifted up to unhook the top clip of the run. The door glass/channel assembly is then slid down the runs. Once the glass is installed, the runs must be re-installed at the top. If the glass runs are glued into the run retainers, then the above will not work (can't move the runs up/down). I don't know how to get the job done if using glue (not original). I can send you photos that might help with your project. Email [email protected]
__________________
[email protected] - email contact https://aafords.com Ford Model AA Truck Club @ aafords.com |
|
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|