The Ford Barn

RocketsGarage · 06-11-2020, 01:13 PM

Anyone used this before? How dose it attach to your stand? Anything better out there you'd recommend? It's sold by allfordparts.com

http://www.allfordparts.com/shop/cat...-stand-adapter

Tim Ayers · 06-11-2020, 01:29 PM

Yes, I have the version sold by Jim Gordon. The two studs go into the holes in the center and slide into the slots of the plate on most engine stands. You do not use the four arms that normally attach to that (obviously). Works great.

KiWinUS · 06-11-2020, 01:50 PM

I have 2 of these. As Tim said for mounting & work great.

RocketsGarage · 06-11-2020, 02:43 PM

Thank you! Anyone have any pictures of a motor mounted up on one?

51504bat · 06-11-2020, 03:29 PM

I got mine from Stumpys:
https://www.stumpysfabworks.com/stor..._Products.html

Straight forward design and bolted to my 59ab and 8ba no problem.

cajunfirehawk · 06-11-2020, 08:44 PM

Sponsored Links (Register now to hide all advertisements)

Quote:

Originally Posted by 51504bat

I got mine from Stumpys:
https://www.stumpysfabworks.com/stor..._Products.html

Straight forward design and bolted to my 59ab and 8ba no problem.

Ditto, me too.

06-11-2020, 01:29 PM	#2
Tim Ayers Senior Member Join Date: May 2010 Location: NJ Posts: 6,181	Re: New Vintage Reproductions flathead engine stand Yes, I have the version sold by Jim Gordon. The two studs go into the holes in the center and slide into the slots of the plate on most engine stands. You do not use the four arms that normally attach to that (obviously). Works great.

06-11-2020, 01:50 PM	#3
KiWinUS Senior Member Join Date: May 2010 Location: Charlotte NC KiWi-L100 available here Posts: 2,963	Re: New Vintage Reproductions flathead engine stand I have 2 of these. As Tim said for mounting & work great.

06-11-2020, 02:43 PM	#4
RocketsGarage Member Join Date: Jan 2014 Location: Sunnyside Washington Posts: 91	Re: New Vintage Reproductions flathead engine stand Thank you! Anyone have any pictures of a motor mounted up on one? __________________ www.RocketsGarage.com

06-11-2020, 03:29 PM	#5
51504bat Senior Member Join Date: Sep 2013 Location: SoCal-Redlands Posts: 3,024	Re: New Vintage Reproductions flathead engine stand I got mine from Stumpys: https://www.stumpysfabworks.com/stor..._Products.html Straight forward design and bolted to my 59ab and 8ba no problem. __________________ Making the simple complicated for over 30 years.