|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-04-2020, 03:11 PM | #1 |
Senior Member
Join Date: Jul 2010
Location: Conifer, Colorado
Posts: 2,431
|
Tube nuts for the vacuum line for a 53' Mercury
Are the correct tube nuts still made for the vacuum line, for a 53' Mercury? All I can find is the 3/16" tube nut inverted flare to be used with the 3/16" compression sleeve, shown on the left of the picture. Is anyone still making the complete vacuum line? If I can't find a complete line I will make one, but I will need the correct tube nuts.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|