|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-11-2020, 09:43 PM | #21 |
Member
Join Date: Jul 2014
Location: orrington, maine
Posts: 89
|
Re: 5 spd in a 37 pickup with a 4.44 rearend.
Getting ready to install the Merc intake and Rochester 2gc with new electric choke. Wish me luck.
|
01-11-2020, 11:49 PM | #22 |
Senior Member
Join Date: May 2010
Location: Wa.
Posts: 5,409
|
Re: 5 spd in a 37 pickup with a 4.44 rearend.
Check the yoke on the rear end for galling in the cup seats. Every thing can be tight but it will vibrate under load. I had the same vibration problem. A new yoke fixed it.
For your info, there is room in the tail shaft housing for 2 bearings. Really helps prolong yoke life. You will most likely want to install a short throw shift adapter eventually. They really make shifting a pleasure. You can buy them but it is quite easy to make one. With a 14 inch stick, the knob moves 4 inches from 1st to 2nd. |
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|