The Ford Barn

klawockvet · 12-17-2016, 11:52 AM

I'm trying to put together a basket case. I think these go somewhere in the doors or windows of a 40 tudor. Thanks in advance.

Fourdy · 12-17-2016, 02:15 PM

I believe they are arm rest brackets?
Fourdy

HDowse · 12-17-2016, 02:38 PM

I recall the armrest on my driver's door was held in by screws thru the door panel into the frame of the armrest. They look like seat back hooks for the back of the rear seat. They go on the rear vertical frame where the seat goes and a horizontal part of the rear seat spring slides on there.

Ken/Alabama · 12-17-2016, 04:12 PM

Yes, those go on the door side of the door panel and screw into the arm rest front holes. Then when the door panel is installed those brackets hook into a slot in the inner door structure.

d.conrad · 12-18-2016, 09:37 AM

^^^I agree^^^

klawockvet · 12-18-2016, 03:14 PM

Sponsored Links (Register now to hide all advertisements)

The responses explain why I couldn't figure it out as there were no door panels or arm rests on the car. I should be able to figure it out from here. Thanks to all.

12-17-2016, 02:15 PM	#2
Fourdy Senior Member Join Date: May 2010 Location: Port Townsend, WA Posts: 601	Re: Help to identify these 40 Parts I believe they are arm rest brackets? Fourdy __________________ My 24 T http://fordbarn.com/forum/showthread...ghlight=fourdy

12-17-2016, 02:38 PM	#3
HDowse Senior Member Join Date: May 2010 Location: Hancock, New Hampshire Posts: 375	Re: Help to identify these 40 Parts I recall the armrest on my driver's door was held in by screws thru the door panel into the frame of the armrest. They look like seat back hooks for the back of the rear seat. They go on the rear vertical frame where the seat goes and a horizontal part of the rear seat spring slides on there.

12-17-2016, 04:12 PM	#4
Ken/Alabama Senior Member Join Date: May 2010 Location: Alabama Posts: 3,263	Re: Help to identify these 40 Parts Yes, those go on the door side of the door panel and screw into the arm rest front holes. Then when the door panel is installed those brackets hook into a slot in the inner door structure. Last edited by Ken/Alabama; 12-18-2016 at 03:55 PM.

12-18-2016, 09:37 AM	#5
d.conrad Senior Member Join Date: Aug 2010 Location: St. Louis, Mo Posts: 362	Re: Help to identify these 40 Parts ^^^I agree^^^

12-18-2016, 03:14 PM	#6
klawockvet Senior Member Join Date: May 2012 Location: Klawock, AK/Kanab, UT Posts: 301	Re: Help to identify these 40 Parts Sponsored Links (Register now to hide all advertisements) The responses explain why I couldn't figure it out as there were no door panels or arm rests on the car. I should be able to figure it out from here. Thanks to all.