The Ford Barn

sonny · 02-23-2012, 07:40 PM

I just purchased a 6 volt wiper motor from early Ford. I was going to wire it to the ignition switch but would that interfere with the ignition performance? Don't want to go straight to the battery. Everything is new stock and the wiper motor can go either way. Pos. or neg. ground. Thanks.

sonny · 02-24-2012, 01:22 PM

What about to the amp. gauge? Anybody?

51 MERC-CT · 02-24-2012, 01:48 PM

It is ok to wire into the Ign. switch with the appropriate in line fuse.

sonny · 02-24-2012, 01:55 PM

Sponsored Links (Register now to hide all advertisements)

Sorry it's a 32BB 1.5 ton dually flatbed. Except for the electric wipers all the wiring is stock nos. Thanks.

02-23-2012, 07:40 PM	#1
sonny Senior Member Join Date: Oct 2010 Location: Mantua, Ohio Posts: 269	Elect. wipers for 32bb I just purchased a 6 volt wiper motor from early Ford. I was going to wire it to the ignition switch but would that interfere with the ignition performance? Don't want to go straight to the battery. Everything is new stock and the wiper motor can go either way. Pos. or neg. ground. Thanks.

02-24-2012, 01:22 PM	#2
sonny Senior Member Join Date: Oct 2010 Location: Mantua, Ohio Posts: 269	Re: Elect. wipers for 32bb What about to the amp. gauge? Anybody?

02-24-2012, 01:48 PM	#3
51 MERC-CT Senior Member Join Date: May 2010 Location: East Hartford, Ct Posts: 5,898	Re: Elect. wipers for 32bb It is ok to wire into the Ign. switch with the appropriate in line fuse. __________________ DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES

02-24-2012, 01:55 PM	#4
sonny Senior Member Join Date: Oct 2010 Location: Mantua, Ohio Posts: 269	Re: Elect. wipers for 32bb Sponsored Links (Register now to hide all advertisements) Sorry it's a 32BB 1.5 ton dually flatbed. Except for the electric wipers all the wiring is stock nos. Thanks.