Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 08-06-2013, 01:51 PM   #1
sjessen
Junior Member
 
sjessen's Avatar
 
Join Date: Jan 2012
Location: Montgomery, TX
Posts: 29
Unhappy Spedometer Cable Issue

Under the category "If it ain't broke - don't fix it...":

While doing a routine lub job, I decided to clean and graphite the speedometer cable on my '30 Model A. After reassembly, I find that the oval meter will show speed up to about 30mph and then the cable seems to drop out of position and the meter drops to zero. I removed the cable, replaced it for a second time and made sure the ends were engaged - same result. Any thoughts?
sjessen is offline   Reply With Quote
Old 08-06-2013, 02:42 PM   #2
Ron/IA
Senior Member
 
Join Date: May 2010
Location: Amana IA
Posts: 527
Default Re: Spedometer Cable Issue

sjessen - I am guessing here, but make sure there is a washer or flat at the speedo end of the cable to keep it from slipping back into the cable housing.

Maybe one of the speedo repairers can chime in.

Ron/IA
__________________
Ron/IA
1929 Fordor Steelback

Hawk A Model A Ford Club
http://hawkamodelaclub.org/
Ron/IA is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 08-06-2013, 03:18 PM   #3
sjessen
Junior Member
 
sjessen's Avatar
 
Join Date: Jan 2012
Location: Montgomery, TX
Posts: 29
Default Re: Spedometer Cable Issue

Sponsored Links (Register now to hide all advertisements)
Don't remember seeing a washer at the lower end... Maybe that's it. Thanks
Steve J.
sjessen is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 12:30 PM.