Model A Torqueflite 904 kit

[CarlG]

Originally Posted by Vic in E-TN

Carl:
Do you have the product number easily available for the ARP head studs for the A engine?
Vic

Originally Posted by CarlG

12 ea AP3.500-ISB
2 ea AP5.750-ISB

Depending on your head, these may be a quarter inch too long. If they are, just order shorter ones or use a really thick SAE washer under the nut. The length is in the part #.

No need to tell them you are buying these for a Model A, they've never heard of one.

Originally Posted by forever4

Carl,
I think you better recheck that second part number.

Originally Posted by CarlG

I can re-check my invoice from them as well as measure what I have on my engine.

The sizes I listed are 1/32" longer than what is in Snyder's catalog:

Regular short studs: 3-15/32". Long outlet studs: 5-23/32".

I did re-check my invoice from ARP, and the sizes listed are what I have.