My turn signal switch is shot

[Old Redneck]

Kultulz the picture that you shown on E-Bay is correct like mine

[KULTULZ]

Originally Posted by Old Redneck

Kultulz the picture that you shown on E-Bay is correct like mine

Appreciate that. That is settled. All you need now is a B6AZ 13341-A and modify the harness.

Let me make one more sweep.

[paul2748]

CASCO show parts in their catalog - have you contacted them.,. If they don' have it, try Prestige. Another possible source is Adrian Lori ( 570-709-0823) - he has a lot of parts for early birds. Maybe not new, but good used. Ok to deal with.

[Dominic Hide]

Originally Posted by Old Redneck

Kultulz the picture that you shown on E-Bay is correct like mine

Take another look. Your switch is rectangular with two straight slick sides. The passenger example shown has one curved side, with sculpted indents to locate and hold the left and right positions. On the thunderbird the position indents are built into the top of the steering column.

[KULTULZ]

That's why I asked for a photo of the take-out.





Both the above are the B6AZ 13341-A.

Below are shots of the B6SZ 13341-A.

One is REPRO and the OEM is not that concise -

https://www.fordbarn.com/forum/attac...1&d=1658737973

https://www.fordbarn.com/forum/attac...3&d=1658737973

THANX! for the heads-up Dominic ...

Need a head-on photo of the take-off ...

[Old Redneck]

Sponsored Links (Register now to hide all advertisements)

Picture of Switch

[Old Redneck]

I took that picture with my Cell Phone and had to get my grandson to transfer it to my Computer. Its been a hard day here. Old age I guess.Went and look at a Dodge Power Wagon for sale. It was very rough.

[KULTULZ]

Originally Posted by Dominic Hide

Take another look. Your switch is rectangular with two straight slick sides. The passenger example shown has one curved side, with sculpted indents to locate and hold the left and right positions. On the thunderbird the position indents are built into the top of the steering column.

I see the difference now (even one photo is inverted). Has to be a 56/57 BIRD ONLY SW.





Well, guess I don't have to go through the stuff for another ten years ...

[Lamar Wadsworth]

I have an extra column and steering box from a '55 with 3 on the tree, so it's the same as the one in my '55. Is the turn signal switch different for an automatic transmission car? Don't see why it should be. I don't have one from an automatic car for comparison.

[KULTULZ]

No, the TSS will be the same for both manual and automatic. The 55 BIRD TSS is unique though to the 55 BIRD.

[Old Redneck]

I just pick up a NOS Turn Signal Switch. Right in my own town. He has 3 NOS and several used. His basement full of 56 and 57 NOS parts. He is 84 years old. He has two Automatic Transmission one air cooled and the other water cooled. He sold me the booksEarly Bird from 1960 up to 2020 cheap and other books. I got a honey hole I guess. Rear oil seal NOS. He has a 57 intake, carb and dist. for me down the road.Also the 57 Air Cleaner. I seen a Hard top there with Port Hole. Price ? Will let me know. He has the eyebrows NOS super nice. I might buy them later. I got 5 Boxes of Early Bird Books to read. Now he not cheap and knows what parts are worth.

[KULTULZ]

Originally Posted by Old Redneck

I just pick up a NOS Turn Signal Switch. Right in my own town. He has 3 NOS and several used.

Talk about luck ...