|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-13-2011, 09:04 AM | #1 |
Senior Member
Join Date: May 2010
Location: Auburn Washington
Posts: 2,552
|
A400 68C rubber stem bumpers
On the A400 and the 68C there is three rubber stem bumper on the top under the header pan ,there use to be a guy out there that made them but he does not make them anymore, I found a place that will make them for me but them have a minimum order is there anyone out there is willing to pay $5 delivered for all three,
|
11-13-2011, 09:20 AM | #2 |
Senior Member
Join Date: May 2010
Location: Glendale, AZ
Posts: 2,952
|
Re: A400 68C rubber stem bumpers
I am if they are the same as original
|
Sponsored Links (Register now to hide all advertisements) |
|
11-13-2011, 10:05 AM | #3 |
Senior Member
Join Date: May 2010
Location: South East NJ
Posts: 3,398
|
Re: A400 68C rubber stem bumpers
I need a set.
|
11-13-2011, 10:31 AM | #4 |
Senior Member
Join Date: May 2010
Location: ⓉⒺXⒶⓈ
Posts: 2,047
|
Re: A400 68C rubber stem bumpers
I'm not following you. Picture? I may need some.
__________________
-------------- Drive it like you know how to fix it! DMAFC / OILERS CC-MC |
11-13-2011, 10:35 AM | #5 |
Member
Join Date: May 2010
Posts: 36
|
Re: A400 68C rubber stem bumpers
I will take 3 or 4 sets. Bill edstrom
|
11-13-2011, 10:58 AM | #6 |
Registered User
Join Date: May 2010
Location: Sacramento Ca
Posts: 1,179
|
Re: A400 68C rubber stem bumpers
Sponsored Links (Register now to hide all advertisements)
tom |
11-13-2011, 11:07 AM | #7 |
Senior Member
Join Date: May 2010
Location: Glendale, AZ
Posts: 2,952
|
Re: A400 68C rubber stem bumpers
|
11-13-2011, 11:19 AM | #8 |
Senior Member
Join Date: Aug 2010
Location: Grass Valley,CA
Posts: 295
|
Re: A400 68C rubber stem bumpers
ME TOO !!
Bruce Davis [email protected] |
11-13-2011, 12:04 PM | #9 |
Senior Member
Join Date: May 2010
Location: Kenosha, WI
Posts: 1,001
|
Re: A400 68C rubber stem bumpers
Hi, I will take three sets also. Jim Sinclair ( [email protected] )
|
11-13-2011, 12:11 PM | #10 |
Member
Join Date: May 2010
Location: Baton Rouge, LA
Posts: 65
|
Re: A400 68C rubber stem bumpers
I wish to have two sets. Thanks.
Skipper McAdams |
11-13-2011, 01:09 PM | #11 |
Senior Member
Join Date: May 2010
Location: ⓉⒺXⒶⓈ
Posts: 2,047
|
Re: A400 68C rubber stem bumpers
Ok. I need some... Now I need to know what the heck they are and where they go!
What are "rubber stem bumpers??" I cannot think where the go on that metal top header with the thumb screws.
__________________
-------------- Drive it like you know how to fix it! DMAFC / OILERS CC-MC |
11-13-2011, 01:25 PM | #12 |
Senior Member
Join Date: May 2010
Location: Glendale, AZ
Posts: 2,952
|
Re: A400 68C rubber stem bumpers
Look under your top (wood) header there is the metal header piece (strip) and it has 3 holes in it.
2 on each side and one in the middle, that is where there going They keep the top header from rubbing the top of the windshield header |
11-13-2011, 01:33 PM | #13 |
Senior Member
Join Date: May 2010
Location: ⓉⒺXⒶⓈ
Posts: 2,047
|
Re: A400 68C rubber stem bumpers
Oh!! Haha. You mean those three empty holes?? Haha
YUP! I need some!
__________________
-------------- Drive it like you know how to fix it! DMAFC / OILERS CC-MC |
11-13-2011, 01:41 PM | #14 |
Senior Member
Join Date: May 2010
Location: Glendale, AZ
Posts: 2,952
|
Re: A400 68C rubber stem bumpers
I told you so!
|
11-13-2011, 01:49 PM | #15 |
BANNED
Join Date: Dec 2010
Posts: 956
|
Re: A400 68C rubber stem bumpers
Put me down for 2 sets.
|
11-13-2011, 03:26 PM | #16 |
Senior Member
Join Date: May 2010
Location: Wichita, Kansas
Posts: 710
|
Re: A400 68C rubber stem bumpers
I'll take a couple sets.
|
11-13-2011, 03:44 PM | #17 |
Junior Member
Join Date: May 2010
Posts: 14
|
Re: A400 68C rubber stem bumpers
I would like a couple of sets.
|
11-13-2011, 03:50 PM | #18 |
Senior Member
Join Date: May 2010
Location: Michigan
Posts: 1,593
|
Re: A400 68C rubber stem bumpers
I'll take a set.
|
11-13-2011, 08:40 PM | #19 |
Senior Member
Join Date: May 2010
Location: Englewood, Colorado
Posts: 1,372
|
Re: A400 68C rubber stem bumpers
I will take 20 sets, so we have some in the future for other restorers. Had three people ask me for those just this week.
Steve Becker Bert's Model A Center 800-321-1931 |
11-13-2011, 09:08 PM | #20 |
Senior Member
Join Date: May 2010
Posts: 235
|
Re: A400 68C rubber stem bumpers
Last edited by BadgerA; 11-13-2011 at 09:14 PM. |
11-14-2011, 08:00 AM | #21 |
Senior Member
Join Date: May 2010
Location: Auburn Washington
Posts: 2,552
|
Re: A400 68C rubber stem bumpers
Thanks for the responce Guy`s, I`m ordering them today they told me it would be 4 to 6 weeks lead time.I will let you know they come in. John
|
11-14-2011, 08:44 AM | #22 |
Senior Member
Join Date: May 2010
Location: Glendale, AZ
Posts: 2,952
|
Re: A400 68C rubber stem bumpers
Hi John
Do you want us to start sending money now. |
Sponsored Links (Register now to hide all advertisements) |
|
11-14-2011, 09:10 AM | #23 |
Member
Join Date: May 2010
Posts: 72
|
Re: A400 68C rubber stem bumpers
OK, OK, I guess I need a couple of sets!
[email protected] |
11-14-2011, 09:45 AM | #24 |
Member
Join Date: May 2010
Location: northport mi
Posts: 87
|
Re: A400 68C rubber stem bumpers
I will take a set
|
11-14-2011, 04:09 PM | #25 |
Member
Join Date: May 2010
Location: Arizona
Posts: 50
|
Re: A400 68C rubber stem bumpers
I could use 2 sets.
Larry Gilbert |
11-14-2011, 08:25 PM | #26 |
Junior Member
Join Date: May 2010
Location: manitowish waters wi.
Posts: 19
|
Re: A400 68C rubber stem bumpers
Sponsored Links (Register now to hide all advertisements)
Don Shebuski |
11-14-2011, 09:39 PM | #27 |
Junior Member
Join Date: May 2010
Location: Oxford, Kansas
Posts: 10
|
Re: A400 68C rubber stem bumpers
I will take two sets. Thanks
|
11-15-2011, 05:41 AM | #28 |
Junior Member
Join Date: May 2010
Posts: 3
|
Re: A400 68C rubber stem bumpers
I'll take two sets for my 68C project - starting soon.
|
11-15-2011, 07:51 AM | #29 |
Junior Member
Join Date: May 2010
Location: Massachusetts
Posts: 13
|
Re: A400 68C rubber stem bumpers
I'll take a set as well. Tim O'Brien [email protected]
|
11-15-2011, 08:36 AM | #30 |
Senior Member
Join Date: May 2010
Location: Auburn Washington
Posts: 2,552
|
Re: A400 68C rubber stem bumpers
Guy`s do not send any money until after I receive the bumpers, I just want to have them in my hands and make sure they are correct first, thanks John
|
11-15-2011, 02:29 PM | #31 |
Senior Member
Join Date: May 2010
Location: Tennessee
Posts: 445
|
Re: A400 68C rubber stem bumpers
PM sent, count me in.
Bill U |
11-18-2011, 10:03 AM | #32 |
Member
Join Date: May 2010
Posts: 98
|
Re: A400 68C rubber stem bumpers
I would like three sets please. Do you have a expected delivery time?
Can anyone help me locate the two rubber bumpers midway down the top rail and also the rubber strips located within the metal channel that rests against the quarter window rail. Any leads would be helpful. Thanks Mike 719-671-8006 |
11-18-2011, 12:33 PM | #33 |
Registered User
Join Date: May 2010
Location: Sacramento Ca
Posts: 1,179
|
Re: A400 68C rubber stem bumpers
hey guys
I notice there are several people here working on the 68C i keep the records for that body style and dont have your name please get ahold of me so i can record the data on this rare body style and maybe we can get together and get all the parts needed this also goes for the 400A guys,Joop is on here too thanks for the help sorry John I dont mean to cut into your thread but i think we can get some of these parts availible for the guys that need them tom moniz 68C record keeper [email protected] |
11-18-2011, 03:59 PM | #34 |
Senior Member
Join Date: May 2010
Location: Snohomish Wa.
Posts: 389
|
Re: A400 68C rubber stem bumpers
John, I will take a set. Perry
|
06-28-2018, 09:49 AM | #35 |
Senior Member
Join Date: Jan 2018
Location: Greenwich, CT
Posts: 140
|
Re: A400 68C rubber stem bumpers
Any more bumpers available? I'm a new member of the Barn, and I'm looking at old posts... Thanks, John Baldwin
|
06-28-2018, 09:57 AM | #36 |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 3,470
|
Re: A400 68C rubber stem bumpers
__________________
Bob Bidonde |
06-29-2018, 12:20 PM | #37 |
Senior Member
Join Date: May 2010
Location: Fayetteville, Georgia
Posts: 467
|
Re: A400 68C rubber stem bumpers
I'm in the process of gathering parts/pieces for my 68C. Please add me to your list if you would, as I will need to replace these when I get to that point. Thanks in advance for your kind assistance.
|
06-29-2018, 06:34 PM | #38 |
Senior Member
Join Date: May 2010
Location: St Charles , Missouri
Posts: 1,998
|
Re: A400 68C rubber stem bumpers
John
Put me down for 4 sets. I heard the 36 cabriolet were same or very close but haven’t checked them out. Thanks for your work in this. Larry shepard |
06-29-2018, 09:23 PM | #39 |
Senior Member
Join Date: May 2010
Location: Kenosha, WI
Posts: 1,001
|
Re: A400 68C rubber stem bumpers
Hi John, I’m interested in three sets. Let me know. Thank you for your efforts on this.
Jim Sinclair |
06-29-2018, 11:44 PM | #40 |
Senior Member
Join Date: May 2010
Location: Portland OR
Posts: 6,341
|
Re: A400 68C rubber stem bumpers
Guys look at the date of the original postings they are Nov of 2011. You might send the original poster a PM or contact Berts, if you read the whole thing looks like Berts asked about extra sets. Also I do not see any follow up that they were even made.
__________________
I know the voices aren't real but damn they have some good ideas! |
07-07-2018, 09:14 PM | #41 |
Senior Member
Join Date: May 2010
Location: Auburn Washington
Posts: 2,552
|
Re: A400 68C rubber stem bumpers
I still have A LOT of them 7/7/18 John
|
07-09-2018, 09:49 AM | #42 |
Junior Member
Join Date: Aug 2011
Location: whidbey island, WA
Posts: 8
|
Re: A400 68C rubber stem bumpers
I'll take a couple sets.
Keith Cavender |
Sponsored Links (Register now to hide all advertisements) |
|
07-09-2018, 06:06 PM | #43 |
Senior Member
Join Date: May 2010
Location: Auburn Washington
Posts: 2,552
|
Re: A400 68C rubber stem bumpers
guy`s I went back and looked at my original post. it will not let me edit it. I have had to rise the price since then for the shipping cost. I will honor that price for the ones that have ordered up until 7/9/18 there after it will be $12 for the first set of three, any orders over one set will be $5 per set. Keith I will have a couple sets for you here.
|
07-10-2018, 05:07 AM | #44 |
Senior Member
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,372
|
Re: A400 68C rubber stem bumpers
Yep
I sent some stuff out by post office yesterday that always cost $1.95 Yesterday was $3.50 Exact same, questioned clerk and she double checked |
07-11-2018, 04:13 PM | #45 |
Senior Member
Join Date: Jul 2010
Location: Wichita Falls, Texas
Posts: 983
|
Re: A400 68C rubber stem bumpers
I will take 3 sets
|
07-11-2018, 05:44 PM | #46 |
Senior Member
Join Date: Apr 2011
Location: Davenport, Iowa
Posts: 2,112
|
Re: A400 68C rubber stem bumpers
Sponsored Links (Register now to hide all advertisements)
Marshall |
07-11-2018, 07:17 PM | #47 |
Senior Member
Join Date: May 2010
Location: Auburn Washington
Posts: 2,552
|
Re: A400 68C rubber stem bumpers
I sent out my last set at the original price of $5 today it cost me $6 to send them. so if anyone wants some now it is $12 for the first set and $5 for any additional sets.
|
07-12-2018, 09:36 AM | #48 |
Senior Member
Join Date: May 2010
Location: Northport, NY
Posts: 1,597
|
Re: A400 68C rubber stem bumpers
I'll take a set, thank you
|
07-12-2018, 10:03 AM | #49 |
Senior Member
Join Date: May 2010
Location: Snohomish Wa.
Posts: 389
|
Re: A400 68C rubber stem bumpers
John last fall I replaced mine. We have a local hardware store that is very well equipped with fasteners etc. They fit & seem to work well but I will take a set just to have them on hand & compare with what I have.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|