|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-10-2015, 08:43 AM | #1 |
Senior Member
Join Date: Mar 2012
Location: lexington sc
Posts: 456
|
no 3 cyl not firing
hello
before i started to put the frt end on my car i went for a drive ran like a top i puled the fuse from the starter and pulled the gas line from the motor sis not pull anything else i put water in it and fired it up no 3 not firing the motor only has 125 miles on it since rebuild what to i need to look at kevin 1930 model a tudor |
06-10-2015, 08:53 AM | #2 |
Senior Member
Join Date: Jun 2011
Location: Upstate South Carolina
Posts: 794
|
Re: no 3 cyl not firing
Pull the #3 plug and look at it. Is it wet? Is it fouled? Clean it, switch with another cylinder. Did the problem move or go away or is it still on #3?
Good Luck |
Sponsored Links (Register now to hide all advertisements) |
|
06-10-2015, 09:25 AM | #3 |
Senior Member
Join Date: Mar 2012
Location: lexington sc
Posts: 456
|
Re: no 3 cyl not firing
hello
i cleaned the points and disturber cap all is well kevin |
06-10-2015, 09:32 AM | #4 |
Senior Member
Join Date: Jun 2011
Location: Upstate South Carolina
Posts: 794
|
Re: no 3 cyl not firing
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|