'29 CC PU assembly confusion

[1955cj5]

Originally Posted by Hitman

I don’t see how you are wrong. There are two holes on each side in the cabs for the A and AA frame as you stated earlier. The A frame only has holes for the outside holes.

The inner holes do not overlap the A frames. Even though several pictures in this thread show bolts in the inner hole on A frames, these holes should be empty. They never left the factory with hardware in those holes on A frames.

So I started looking through pictures of when I first brought the ccpu home and was cleaning it up.

Lots of debris under the seat......but this is a picture of the rear of the cab after it was cleaned.

There is no bolt in the inner hole, nor are there any marks indicating one might have been there.....

I don't have a good picture of the drivers side, but I still have the old blocks in storage.....it'll be interesting to see what that potentially original rear block looked like..