|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-25-2010, 04:43 PM | #1 |
Junior Member
Join Date: May 2010
Location: Stanwood, Washington
Posts: 12
|
Need body block dimensions for '29 RPU
A previous owner of my 1929 Roadster Pickup replaced the original body blocks with washers and 1/4" plywood. The resulst was misalignment of the doors and hood.
I have many years experience as a cabinet maker and would like to make the blocks myself. I have searched the web but have not been able to find a diagram with dimensions. Any help would be greatly appreciated. |
08-26-2010, 11:10 AM | #2 |
Senior Member
Join Date: May 2010
Location: Fresno, Ca.
Posts: 3,636
|
Re: Need body block dimensions for '29 RPU
Lar,
A&L has what your looking for, 1$, talk to Allen. 1-860-693-0112, plus a nice catalog! Dudley |
Sponsored Links (Register now to hide all advertisements) |
|
08-26-2010, 02:03 PM | #3 |
BANNED
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 6,066
|
Re: Need body block dimensions for '29 RPU
If you want diagrams of the originals, you will have to research the part numbers, then order the drawings from the Ford Archives.
By that time, you could have orderd them from a reputable Model A Parts house such as A&L, Brattons, Snyders, Bert's or Scramento Vintage Ford and will have saved BIG BUCKS! Pluck |
09-08-2010, 03:33 PM | #4 |
Junior Member
Join Date: May 2010
Location: Stanwood, Washington
Posts: 12
|
Re: Need body block dimensions for '29 RPU
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|