NEW products available thread

[BoxCar Tom]

Yipes, is that semantics or grammer that invaded a compliment ?

[Tim Ayers]

Originally Posted by 19Fordy

THANK YOU to all those who spend the $, time, effort and knowledge to make all the repro. parts shown in this thread.

Agreed.

[Mac VP]

We now have available new replacement starter cups for the truck 8RT-6392 bell housings. This is a brand new part made of steel that fits perfectly in the opening of the cast iron 8RT truck bell housings. Replace that damaged or missing cup. You can weld or glue the new cup into the place of the original cup, which was rolled/crimped into place by Ford. Protects your starter from road dust and water spray. Link to our website for these:

http://www.vanpeltsales.com/FH_web/e...prices-pg2.htm

[KiWinUS]

Originally Posted by Mac VP

We now have available new replacement starter cups for the truck 8RT-6392 bell housings. This is a brand new part made of steel that fits perfectly in the opening of the cast iron 8RT truck bell housings. Replace that damaged or missing cup. You can weld or glue the new cup into the place of the original cup, which was rolled/crimped into place by Ford. Protects your starter from road dust and water spray. Link to our website for these:

http://www.vanpeltsales.com/FH_web/e...prices-pg2.htm

Very Nice Mac Thank you.

[Mac VP]

We didn’t have a large quantity made for the first time….. wanted to see how they fit and get an idea of what the demand would be before we have more made. I’m very happy with the fit.

[Tim Ayers]

Sponsored Links (Register now to hide all advertisements)

Great product, Mac. Where do they all go? See a fair share of these bells with missing or severely dented caps.

[OldGold360]

Hello Folks,

After always struggling to find good originals, I have decided to make the carpet retainer sockets for 1932 Fords, part no. 353109-S15. These are now available on my website or PM me here if you need more information. Don't forget to use discount code FORDBARN10 to save yourself 10% on any order.

Thanks!

[petehoovie]

Originally Posted by OldGold360

Hello Folks,

After always struggling to find good originals, I have decided to make the carpet retainer sockets for 1932 Fords, part no. 353109-S15. These are now available on my website or PM me here if you need more information. Don't forget to use discount code FORDBARN10 to save yourself 10% on any order.

Thanks!

[35fordtn]

A few new items available:

1933-34 Ford rear transmission support
https://thirdgenauto.com/product/193...mission-mount/

1934 Ford Chrome plated grille
https://thirdgenauto.com/product/new...chrome-plated/

1932-36 Ford rear transmission support special "D" headed bolts
https://thirdgenauto.com/product/193...olts-set-of-4/

[Tim Ayers]

Originally Posted by 35fordtn

A few new items available:

1933-34 Ford rear transmission support
https://thirdgenauto.com/product/193...mission-mount/

1934 Ford Chrome plated grille
https://thirdgenauto.com/product/new...chrome-plated/

1932-36 Ford rear transmission support special "D" headed bolts
https://thirdgenauto.com/product/193...olts-set-of-4/

Michael:

Any chance you'll be making the special the smaller diameter headed castle nuts for the '32-'36 D headed bolts?

[35fordtn]

Originally Posted by Tim Ayers

Michael:

Any chance you'll be making the special the smaller diameter headed castle nuts for the '32-'36 D headed bolts?

The bolts made are the longer of the two versions. Castle Nuts have become incredilbly expensive to make in the US. What I use are Model A Ford rear backing plate nuts made by Snyder's. They are 7/16-20 with a 5/8" hex like original unline the most common 11/16". They have a shoulder so if you are using the long version bolts in a short version scenario the work perfect, otherwise just tunr the shoulder off in a lathe.

https://thirdgenauto.com/product/192...ouldered-nuts/

[Tim Ayers]

Originally Posted by 35fordtn

The bolts made are the longer of the two versions. Castle Nuts have become incredilbly expensive to make in the US. What I use are Model A Ford rear backing plate nuts made by Snyder's. They are 7/16-20 with a 5/8" hex like original unline the most common 11/16". They have a shoulder so if you are using the long version bolts in a short version scenario the work perfect, otherwise just tunr the shoulder off in a lathe.

https://thirdgenauto.com/product/192...ouldered-nuts/

Ah, got it. The difference in length is for the cast vs stamped couplers, right?

[35fordtn]

Originally Posted by Tim Ayers

Ah, got it. The difference in length is for the cast vs stamped couplers, right?

Correct

[DavidG]

OldGold360,


Any chance that you'll be making the capped studs used with floor mats and your sockets?


Your sockets were also used on '33-'34 V8 passenger car #1 wood floor boards.

[OldGold360]

Originally Posted by DavidG

OldGold360,


Any chance that you'll be making the capped studs used with floor mats and your sockets?


Your sockets were also used on '33-'34 V8 passenger car #1 wood floor boards.

Hi David.
I am hoping to. I have some good originals to use, I just need to find the time to figure out how best to make them. I did just finish up everything I needed to do to be able to accurately reproduce the ‘32 floorboards and I will always have them in stock, unless they stop making nice plywood.

I am currently working on finishing up a couple of other pieces. When those are finished, I will look at reproducing those capped studs. I’ll share some updates here when that time comes. Till then, here are some pictures of the ‘32 Floorboards.

[DavidG]

Your boards look great!

[petehoovie]

Originally Posted by OldGold360

Hi David.
I am hoping to. I have some good originals to use, I just need to find the time to figure out how best to make them. I did just finish up everything I needed to do to be able to accurately reproduce the ‘32 floorboards and I will always have them in stock, unless they stop making nice plywood.

I am currently working on finishing up a couple of other pieces. When those are finished, I will look at reproducing those capped studs. I’ll share some updates here when that time comes. Till then, here are some pictures of the ‘32 Floorboards.

[deuce lover]

Just fabulous !!

[OldGold360]

Originally Posted by DavidG

Your boards look great!

Thank you David!

[OldGold360]

Originally Posted by deuce lover

Just fabulous !!

Thanks Deuce!