The Ford Barn

roadstar · 09-24-2011, 11:13 AM

I have an original heater from a 40 ford I want to use in my 37 pickup. The truck is still 6 volt so I didn't think I would have a problem witht the one I have.

When I went to hook it up I noticed there were 4 wires coming from the motor and they were cloth covered and covering was rotting and exposing the wires. Along with not knowing which wire was what.

I guess I am looking for a sorce to rebuild or replace the motor with a usable one and identifiy the wires to get it wired up properly.

I figured there is probably even a ford Barner that messes with these old heaters.

Thanks

Rudy

09-24-2011, 11:13 AM	#1
roadstar Member Join Date: May 2010 Location: Detroit Posts: 88	1940 ford heater motor I have an original heater from a 40 ford I want to use in my 37 pickup. The truck is still 6 volt so I didn't think I would have a problem witht the one I have. When I went to hook it up I noticed there were 4 wires coming from the motor and they were cloth covered and covering was rotting and exposing the wires. Along with not knowing which wire was what. I guess I am looking for a sorce to rebuild or replace the motor with a usable one and identifiy the wires to get it wired up properly. I figured there is probably even a ford Barner that messes with these old heaters. Thanks Rudy