The Ford Barn

Bruce Lancaster · 11-01-2015, 06:51 PM

And according to that flyer there's a 97 too.

GB SISSON · 11-01-2015, 09:07 PM

They look good, but I bought 2 clean, complete 94s for 20 bucks each at the Monroe swap meet, and a couple of kits at a nearby ford parts vendors booth for about 30 bucks. They just don't seem too hard to find or to work on. The kits had a float valve that wasn't a needle, but they work really well. Nice to see jobs kept in the states. Three cheers for National!

40 Deluxe · 11-01-2015, 11:30 PM

The video sure looks like this outfit is a rebuilder, NOT a carburetor manufacturer! And they say they "developed" those 94 and 97 carbs; they do not say they manufacture them! To "develop" can mean they thought of the idea and sent a couple of carbs to China to be copied, or that they actually drew up plans, made and tested some prototypes and then went to China.

uncle buck · 11-03-2015, 01:52 AM

Quote:

Originally Posted by petehoovie

Flyer says "Lifetime Warranty"....

After my last experience with a "Lifetime Warranty" , that means nothing , but that was Flaming River not National Carburetor.

flatheadmurre · 11-03-2015, 12:58 PM

One can only wish that the copies are good and all parts are up to specs.
When they start altering just a bit to either dodge the owner rights or cut corners theres soon a lot of non fitting parts and carbs you cant rebuild in the future.

trainguy · 11-03-2015, 02:42 PM

Sponsored Links (Register now to hide all advertisements)

I have one on my 51 conv.,they work good.Phil

uncle buck · 11-03-2015, 09:25 PM

Quote:

Originally Posted by trainguy

I have one on my 51 conv.,they work good.Phil

That's a positive response. I am curious about using a pair on a dual carb 8ba

jake197000 · 11-03-2015, 09:44 PM

china could care less about us they shake your hand with one and a knife in the other.corprate greed. and our weak government. sorry.but i am tired of there junk. id pay the price for quality.its comin back slowly.

2935ford · 11-04-2015, 01:24 PM

Quote:

Originally Posted by BUBBAS IGNITION

WE CAN BE A TOUGH BUNCH SOME TIMES.

A little google work and i found that National Carburetor in Jacksonville Fl, has been building carbs since 1954 are selling this carb.
You can do a virtual tour of their plant in Fla here:

http://www.nationalcarburetors.com/tour.html

the 94 sale flyer...

http://www.nationalcarburetors.com/downloads/ffad.pdf

I hope they have a new flyer.....those prices are a year old?
Still does not state where they are made?

11-01-2015, 06:51 PM	#21
Bruce Lancaster Member Emeritus Join Date: May 2010 Location: Madison, NJ Posts: 5,230	Re: Fuel Force Bully 94 Carburetor And according to that flyer there's a 97 too.

11-01-2015, 09:07 PM	#22
GB SISSON Senior Member Join Date: Jan 2014 Location: Orcas Island Washington Posts: 5,881	Re: Fuel Force Bully 94 Carburetor They look good, but I bought 2 clean, complete 94s for 20 bucks each at the Monroe swap meet, and a couple of kits at a nearby ford parts vendors booth for about 30 bucks. They just don't seem too hard to find or to work on. The kits had a float valve that wasn't a needle, but they work really well. Nice to see jobs kept in the states. Three cheers for National! __________________ Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1946 Tonner Pickup with 226 H six, 1979 Toyota landcruiser wagon, now wearing 1947 Ford Jailbar sheet metal. 'Rusty ol' floorboards, hot on their feet' (Alan Jackson)

11-01-2015, 11:30 PM	#23
40 Deluxe Senior Member Join Date: May 2010 Location: now Kuna, Idaho Posts: 3,818	Re: Fuel Force Bully 94 Carburetor The video sure looks like this outfit is a rebuilder, NOT a carburetor manufacturer! And they say they "developed" those 94 and 97 carbs; they do not say they manufacture them! To "develop" can mean they thought of the idea and sent a couple of carbs to China to be copied, or that they actually drew up plans, made and tested some prototypes and then went to China.

11-03-2015, 12:58 PM	#25
flatheadmurre Senior Member Join Date: Apr 2015 Location: Sweden Posts: 3,045	Re: Fuel Force Bully 94 Carburetor One can only wish that the copies are good and all parts are up to specs. When they start altering just a bit to either dodge the owner rights or cut corners theres soon a lot of non fitting parts and carbs you cant rebuild in the future.

11-03-2015, 02:42 PM	#26
trainguy Senior Member Join Date: May 2010 Location: Lehighton Pa Posts: 1,085	Re: Fuel Force Bully 94 Carburetor Sponsored Links (Register now to hide all advertisements) I have one on my 51 conv.,they work good.Phil

11-03-2015, 09:44 PM	#28
jake197000 Senior Member Join Date: Sep 2010 Posts: 356	Re: Fuel Force Bully 94 Carburetor china could care less about us they shake your hand with one and a knife in the other.corprate greed. and our weak government. sorry.but i am tired of there junk. id pay the price for quality.its comin back slowly.