The Ford Barn

rockfla · 05-11-2016, 01:46 PM

Thanks so much for everyone's help. The car in question is in Europe and appears that what parts are not stock were used as it was all they had available to work, which is usual for the location SO thanks again for all the expertise.

Fordors · 05-11-2016, 02:12 PM

I misspoke when I mentioned the pickup box. I was thinking those had the square end with no splines on the sector shaft, but no, that's not true. I confused it with the Model A sector/pitman, I agree with Andy, it looks stock.

V8COOPMAN · 05-11-2016, 03:32 PM

There's a fender, for sure! DD

05-11-2016, 01:46 PM	#21
rockfla Senior Member Join Date: Mar 2014 Location: Jacksonville FL Posts: 4,053	Re: Stange rear-end ID Thanks so much for everyone's help. The car in question is in Europe and appears that what parts are not stock were used as it was all they had available to work, which is usual for the location SO thanks again for all the expertise.

05-11-2016, 02:12 PM	#22
Fordors Senior Member Join Date: May 2010 Location: Orland Park,IL Posts: 1,402	Re: Stange rear-end ID I misspoke when I mentioned the pickup box. I was thinking those had the square end with no splines on the sector shaft, but no, that's not true. I confused it with the Model A sector/pitman, I agree with Andy, it looks stock. __________________ My school colors are black and blue, I attended the School of Hard Knocks where I received a Masters Degree in Chronic Mopery.

05-11-2016, 03:32 PM	#23
V8COOPMAN Senior Member Join Date: May 2010 Location: East Shore of LAKE HOUSTON Posts: 11,134	Re: Stange rear-end ID There's a fender, for sure! DD __________________ *Click Links Below* __ ▼ *'35-'36 W/8BA & MECHANICAL FAN* *T5 W/TORQUE TUBE*