05-05-2015, 09:54 AM | #181 |
Senior Member
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 5,934
|
Re: carburetor 13/32 deep well socket
Thanks for the update Bill. All is good...
|
05-05-2015, 10:24 AM | #182 |
Senior Member
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,123
|
Re: carburetor 13/32 deep well socket
I would prefer to have it stamped, even if it takes extra time/cost. But will be happy with whatever. All good things take time.
__________________
Alaskan A's Antique Auto Mushers of Alaska Model A Ford Club of America Model A Restorers Club Antique Automobile Club of America Mullins Owner's Club |
Sponsored Links (Register now to hide all advertisements) |
|
05-05-2015, 11:22 AM | #183 |
Senior Member
Join Date: May 2014
Location: Santa Barbara, Ca
Posts: 329
|
Re: carburetor 13/32 deep well socket
Bill, thanks for the update. Not stamped is OK with me too as it will go in a particular place in the tool box, so no problem.
Family takes precedence. |
05-05-2015, 12:50 PM | #184 |
Senior Member
Join Date: May 2010
Location: brentwood, ca
Posts: 4,303
|
Re: carburetor 13/32 deep well socket
Either stamped, or not, I'm still in.
Bob |
05-07-2015, 01:14 AM | #185 |
Senior Member
Join Date: Feb 2015
Posts: 120
|
Re: carburetor 13/32 deep well socket
Thanks for all the support guys, but it obviously sounds like stamped is the preference.
I will make this happen. Bill |
05-21-2015, 12:26 AM | #186 |
Senior Member
Join Date: Feb 2015
Posts: 120
|
Re: carburetor 13/32 deep well socket
Sponsored Links (Register now to hide all advertisements)
All of the sockets are now broached(most critical part). I am in the process of drilling the inside for clearance on the gav housing tube as well as turning and stamping the end of the barrel. Hopefully things will proceed without any hitches!! Bill |
05-21-2015, 08:46 AM | #187 | |
Senior Member
|
Re: carburetor 13/32 deep well socket
Quote:
Great news!!
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
|
05-21-2015, 08:53 AM | #188 |
Senior Member
Join Date: May 2010
Location: La Mesa Ca
Posts: 1,175
|
Re: carburetor 13/32 deep well socket
Still patiently waiting.
|
05-21-2015, 12:42 PM | #189 |
Senior Member
Join Date: May 2010
Location: Kenosha, WI
Posts: 1,010
|
Re: carburetor 13/32 deep well socket
Bill,
Thanks for the update. I'm sure all will be very pleased!! Jim |
06-20-2015, 10:57 PM | #190 |
Senior Member
|
Re: carburetor 13/32 deep well socket
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
06-21-2015, 09:24 AM | #191 |
Junior Member
Join Date: May 2010
Location: rhode island
Posts: 7
|
Re: carburetor 13/32 deep well socket
can I get one too
|
06-21-2015, 10:13 PM | #192 |
Senior Member
Join Date: Feb 2015
Posts: 120
|
Re: carburetor 13/32 deep well socket
Ok Guys,
All of the sockets have been turned and bored for the gav housing. Obviously as stated last update they are all broached for the 13/32 fit. We are now in the process of stamping them which is very time consuming as you can probably imagine since we don't have a fancy fixture to just crank them out. The good part is we have the next 5 weeks off from motorcycle flat track racing, so my youngest son and I should be able to make a lot of progress with the stamping and last step oil quench and temper. This process has proven to be very time consuming. Well beyond what I originally thought. And I doubt I will make another run of these for that reason. In any event I am hoping we can finish these things up and start shipping within the next 5 weeks. Hope all is well with everyone, and I will continue to update over the next couple of weeks. Bill |
06-21-2015, 11:34 PM | #193 |
Senior Member
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 5,934
|
Re: carburetor 13/32 deep well socket
I'm still with ya Bill... I appreciate all your work. Hope I'm still on your list.
|
06-22-2015, 02:04 AM | #194 |
Senior Member
Join Date: Feb 2015
Posts: 120
|
Re: carburetor 13/32 deep well socket
Everyone is still on the list. And only those who are on the list will receive the sockets in the quantity they expressed interest in. I will see to it that everyone gets what they have requested throughout this entire painstaking venture, lol.
I have a complete list of everyone committed for the sockets. You have all been notified via pm or email that you have been placed on the list, so do not worry, you will in fact receive a socket. Bill |
06-22-2015, 03:07 AM | #195 |
Senior Member
|
Re: carburetor 13/32 deep well socket
I was just teasing Bill. I know they will be done when they are done.
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
06-22-2015, 09:06 AM | #196 |
Senior Member
Join Date: May 2010
Location: La Mesa Ca
Posts: 1,175
|
Re: carburetor 13/32 deep well socket
KOOL, still patiently waiting.
|
06-22-2015, 09:35 AM | #197 |
Senior Member
Join Date: May 2014
Location: Santa Barbara, Ca
Posts: 329
|
Re: carburetor 13/32 deep well socket
As we all are. Thanks Bill!
|
06-22-2015, 10:15 AM | #198 |
Senior Member
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,123
|
Re: carburetor 13/32 deep well socket
Thanks Bill. All the good things in life are worth waiting for.
__________________
Alaskan A's Antique Auto Mushers of Alaska Model A Ford Club of America Model A Restorers Club Antique Automobile Club of America Mullins Owner's Club |
07-27-2015, 12:23 AM | #199 |
Senior Member
Join Date: Feb 2015
Posts: 120
|
Re: carburetor 13/32 deep well socket
Hi guys,
Still working on these things every chance we get. Guess I underestimated how much time doing 150 of these things would actually take with everything that is involved. We do have some completed and are currently polishing and stamping the rest in order to do the final heat treat and temper. We have found we will need to rebroach a number of the sockets for proper fit due to minor inconsistencies with the reproduction gav housings. In any event, we are still working diligently on this project, so please bear with me. Bill |
07-27-2015, 04:37 AM | #200 | |
Senior Member
|
Re: carburetor 13/32 deep well socket
Quote:
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|