1909-1910 Kingston 5 Ball reduced to $675

[jim1932]

Sponsored Links (Register now to hide all advertisements)

SOLD!!!!Although I took this apart to clean it, it will need a rebuild. I am not a model T guy, this is my Dad's, so look at pics and ask questions. The pieces of the float were in the bowl, so it hasn't been messed with. The screw that holds the float is there and I screwed it back into a piece of the float to keep it from getting lost. Float mechanism works freely as does the throttle. The balls are brass.

The nut that holds the bowl on is not original. It had a rusty steel one on it. I put a clean one on, but you will want to get the correct brass one. It needs a new cork float. The shaft on the part that screws in the top (big needle valve?) has a slight bend in it. I tried to show it in the photo. also the little plunger set up is slightly bent. Both look like they could be straightened with no problem. A Kingston 5 ball identical to this sold on the auction site for $900 last month.

SOLD

I will pay for US shipping.