|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-04-2013, 03:09 PM | #1 |
Senior Member
Join Date: Jul 2013
Location: San Antonio, Texas
Posts: 687
|
Stock firewall pics
I've been trying to search for stock firewall pics but have not had any luck with good ones. Can somebody post a few pics of yours? Thanks.
|
08-04-2013, 03:33 PM | #2 |
Senior Member
Join Date: May 2010
Location: on the Littlefield
Posts: 6,196
|
Re: Stock firewall pics
Close to stock ---70s Ricks "script "show quality" coil ---it makes very good spark though, the wiper pipe from engine is most likely original, fuel pipe is a repro ---the dirt is less than 30 years old, the patent plate is a late 60s repro in the correct location
|
Sponsored Links (Register now to hide all advertisements) |
|
08-04-2013, 03:50 PM | #3 |
Senior Member
Join Date: Jul 2013
Location: San Antonio, Texas
Posts: 687
|
Re: Stock firewall pics
Perfect. Thanks. I also have that hole next to the plate for the wipers. I was wondering what that was used for. I also have 2 holes between coil and terminal box. Do you know if either one was used for a ground wire? I can't tell from the picture.
|
08-04-2013, 04:47 PM | #4 |
Senior Member
Join Date: May 2010
Location: on the Littlefield
Posts: 6,196
|
Re: Stock firewall pics
No holes between the coil and terminal box---ground wire? no,holes you have are probably from a rewiring project modification, the only separate ground wire I can think of is to the dome light ---everything else grounds through what it is mounted to (a big cause of problems in many restorations---too much paint, no thought to ground path)
|
08-04-2013, 05:11 PM | #5 |
Senior Member
Join Date: Jul 2013
Location: San Antonio, Texas
Posts: 687
|
Re: Stock firewall pics
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|