|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-05-2013, 02:11 PM | #1 |
Senior Member
Join Date: Apr 2012
Location: Saint Helena, California
Posts: 252
|
34 Anti Chater Rod Bolts/Nuts
Can anyone tell me the correct length for the 34 anti chatter bolts that attach the rods to the frame? These are bolts that are countersunk to slip through a 34 frame and anti chatter rod end. I recently picked up two bolts that fit in the hole but seem to be too short. I think they may be from a later model Ford because when I place the bolts through the frame and the end of the anti chatter rod, I only have about 3/8 of and inch of thread left to tighten a nut.
Thanks, Tom |
06-05-2013, 10:48 PM | #2 |
Senior Member
Join Date: May 2010
Posts: 261
|
Re: 34 Anti Chater Rod Bolts/Nuts
Looks like '33-34 are 1 1/8" or 1 1/4" long (I have examples of each) for use with nut and lock washer whereas later years are about 7/8' long as they thread directly into rod.
|
Sponsored Links (Register now to hide all advertisements) |
|
06-06-2013, 11:30 AM | #3 |
Senior Member
Join Date: Apr 2012
Location: Saint Helena, California
Posts: 252
|
Re: 34 Anti Chater Rod Bolts/Nuts
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|