|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Member
Join Date: Sep 2010
Location: Aurora, CO
Posts: 59
|
![]()
I have a 29 Briggs Fordor and I would like to repaint the rain gutters because the paint is flaking off. I see a screw at both ends of the rain gutters. If you remove both screws, do the gutters just come off or are the mounted some other way? Thanks!
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
![]()
No, the rain gutters have a lot of nails that would need to be pulled.
|
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
![]()
Tom doesn't the outer painted gutter snap on to the inner tack strip that is nailed? or is the briggs fordor different.
|
![]() |
![]() |
![]() |
#4 | |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
![]() Quote:
![]() |
|
![]() |
![]() |
![]() |
#5 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
![]()
i would think to just remove the gutter paint them, snap back on and leave the tack strip alone..
|
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
|
![]() Sponsored Links (Register now to hide all advertisements)
__________________
"THE ASSISTANT GURU OF STUFF" |
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: May 2010
Location: Columbiana,OH
Posts: 461
|
![]()
You mention that the rain gutters have screws holding them on. This indicates that at some point in the past, a previous owner has dealt with them in some manner. The rain gutter is in two parts... a backing strip that is nailed to the top wood and the actual gutter which snaps over the backing plate. The screws are likely installed where they go through both parts. I would be afraid that if I removed the screws, the whole assembly would come off or at least come loose. If you are only concerned with appearance, mask them off and paint them.
|
![]() |
![]() |
![]() |
#8 |
Member
Join Date: Sep 2010
Location: Aurora, CO
Posts: 59
|
![]()
I'm thinking that based on the potential problems that may arise from removing them, I will probably just mask and repaint them on the car. Thanks!
|
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|