The Ford Barn

BRENT in 10-uh-C · 06-13-2024, 06:41 AM

Sometimes it is late at night (-or early, early morning) when I can't sleep and so I often try to find a YouTube video such as a Model-A topic to get relaxed where I can go back to bed. Some of these videos are SO upside down that I actually get more frustrated than I get relaxed, ...and this is a great example.

https://www.youtube.com/watch?v=WSCl2-kEQT4&t=288s

Now here we are the next morning and I realize that likely most people will never see anything wrong with this video, but the more I listened to him speak about a "Nu-Way" (Nu-Rex??

??) wrench, or the "dimple in the crank flywheel". ...and countless other things, I just shake my head in total disbelief that this is where our hobby (-and maybe society) is headed.

The irony is that Nu-Rex has, -or had an instructional video on this very topic on how to use this. Maybe if he would have taken the time to watch that video instead of trying to re-time it the 45 times, or whatever the actual amount he did, he would have helped more folks?? But then I would not have had the opportunity to waste about 10 minutes of my life scrolling thru the comments and advice he was given.

Good thing AI will use those comments to assist others in the future!!

Have a great and productive day my friends!!

06-13-2024, 06:41 AM	#1
BRENT in 10-uh-C Senior Member Join Date: May 2010 Location: Eastern Tennessee Posts: 11,971	Watching YouTube videos pertaining to Model-A repair or restoration... Sometimes it is late at night (-or early, early morning) when I can't sleep and so I often try to find a YouTube video such as a Model-A topic to get relaxed where I can go back to bed. Some of these videos are SO upside down that I actually get more frustrated than I get relaxed, ...and this is a great example. https://www.youtube.com/watch?v=WSCl2-kEQT4&t=288s Now here we are the next morning and I realize that likely most people will never see anything wrong with this video, but the more I listened to him speak about a "Nu-Way" (Nu-Rex?? ??) wrench, or the "dimple in the crank flywheel". ...and countless other things, I just shake my head in total disbelief that this is where our hobby (-and maybe society) is headed. The irony is that Nu-Rex has, -or had an instructional video on this very topic on how to use this. Maybe if he would have taken the time to watch that video instead of trying to re-time it the 45 times, or whatever the actual amount he did, he would have helped more folks?? But then I would not have had the opportunity to waste about 10 minutes of my life scrolling thru the comments and advice he was given. Good thing AI will use those comments to assist others in the future!! Have a great and productive day my friends!! __________________ . BRENT in 10-uh-C . www.model-a-ford.com ...(...Finally Updated!! ) .