|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-24-2024, 01:01 PM | #1 |
Senior Member
Join Date: Jul 2016
Location: Lake worth Florida
Posts: 1,148
|
Anyone need a 33-34 front shock for parts
I found a shock which may be a 1933 or 34 front . No arm and probably just parts . Free just pay shipping or pickup . I can email pictures.
If inappropriate here please delete. Gary Last edited by Ggmac; 05-24-2024 at 04:09 PM. |
05-24-2024, 03:05 PM | #2 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,153
|
Re: Anyone need a 33-34 front shock for parts
No shock absorber serves as a front shock on both '33 and '34 Fords. The former fits inside the frame and the latter fits 9n the outside of the frame.
|
Sponsored Links (Register now to hide all advertisements) |
|
05-24-2024, 03:16 PM | #3 |
Senior Member
Join Date: Jul 2016
Location: Lake worth Florida
Posts: 1,148
|
Re: Anyone need a 33-34 front shock for parts
Thanks David , I edited my post . Do you have a picture of the 33 front ? It has two spots where the fill hole could go but only one is drilled . I’m going off a internet picture of ford shocks and I’m too challenged on posting pictures here . I can e- mail the reference picture I’m talking about . Or I can go and take a picture of the shock .
Last edited by Ggmac; 05-24-2024 at 04:09 PM. |
05-24-2024, 04:11 PM | #4 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,153
|
Re: Anyone need a 33-34 front shock for parts
Email is fine at [email protected].
|
05-24-2024, 06:27 PM | #5 |
Senior Member
Join Date: Jul 2016
Location: Lake worth Florida
Posts: 1,148
|
Re: Anyone need a 33-34 front shock for parts
Thanks David . Pictures sent . I hope . After thinking about it and looking at the shock , it must be an inside mount .
|
05-24-2024, 11:21 PM | #6 |
Senior Member
Join Date: May 2010
Posts: 2,539
|
Re: Anyone need a 33-34 front shock for parts
Sponsored Links (Register now to hide all advertisements)
|
05-25-2024, 04:58 AM | #7 |
Senior Member
Join Date: Jul 2016
Location: Lake worth Florida
Posts: 1,148
|
Re: Anyone need a 33-34 front shock for parts
Newc , I’ll measure before I ship it off .
The shock is gone . |
05-25-2024, 07:08 AM | #8 |
Senior Member
Join Date: May 2010
Posts: 4,810
|
Re: Anyone need a 33-34 front shock for parts
Ggmac: Ford did not use the same shock from 34-36 on the rears. They are interchangeable.
|
05-25-2024, 08:22 AM | #9 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,153
|
Re: Anyone need a 33-34 front shock for parts
The '35-'36 rear shocks have a greater capacity and are therefore have larger housings compared to the '34 rears. As Terry points out, they are functionally interchangeable.
What distinguishes the '33 shocks from the '34 rears are the filler plugs. The '33 plugs are about an inch long, have a hex head, and are at an angle to the shock body. The '34 filler plugs are about a 1/2" long, have a square head, and fit perpendicular to the shock body. |
05-25-2024, 12:41 PM | #10 |
Senior Member
Join Date: Jul 2016
Location: Lake worth Florida
Posts: 1,148
|
Re: Anyone need a 33-34 front shock for parts
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|