Early Ford juice brake question.

[Bustingear]

I was just on ebay looking at the early ford juice brakes and i see that inner flange around the axle is squarish on all of them. The set I have has a round inner flange?? I am trying to ID exactly what I have and would appreciate some good advice. Pictured below is my set.?

[rich b]

'35 rear hubs.

[Bustingear]

are the backing plates also 35 rear?

[petehoovie]

Originally Posted by Bustingear

I was just on ebay looking at the early ford juice brakes and i see that inner flange around the axle is squarish on all of them. The set I have has a round inner flange?? I am trying to ID exactly what I have and would appreciate some good advice. Pictured below is my set.?

[cas3]

Are you talking about the grease catch cans? Early are round, after about 37? they are square. And, your backing plates appear to be 39-41, or at least 39 and up as they are hydraulic. Got nuts on the back side of the bottom anchor pins? if not, then 42-48

[Newc]

Sponsored Links (Register now to hide all advertisements)

Those '35 drums are highly sought after for hyd and wire wheels. Good find Newc

[Bustingear]

thanks everyone