|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-04-2023, 12:49 AM | #1 |
Senior Member
Join Date: May 2013
Location: Lake Forest, California
Posts: 246
|
Which Timing Gear?
Probably not a good question as I am only looking at a $90 decision…but, here goes:
I have a rebuilt B engine to install in my Cabriolet. The B block currently has a new fiber gear installed. I am considering pulling that and installing an aluminum one. Backstory though—Several years ago the engine on our Station Wagon decided it wanted ‘love’. As it was getting the attention it needed, a good friend was doing the work and said he was installing an aluminum gear. I initially protested, and he asked “do you like changing timing gears on the side of the road?” Wow, what a great response. Nearly ten years later the wagon is fine, but we have probably only put 3 or 4 thousand miles on it. So now I have another Model A, that won’t get a million miles on it…. The fiber gear will probably last forever based on my usage. But it’s apart already. How many miles/years should someone expect from the fiber gear? I do realize the crank gear and backlash are something that needs to be considered as well. I do not know if the crank timing gear is new or used, but I do plan to check. Thanks!
__________________
Experience is a cruel teacher. It gives the exam first, then the lesson. |
08-04-2023, 05:47 AM | #2 |
Senior Member
Join Date: Jan 2012
Location: Western North Carolina
Posts: 4,107
|
Re: Which Timing Gear?
In the 1960's I changed a timing gear on the side of the road. So I have an aluminum gear in my car now.
__________________
A is for apple, green as the sky. Step on the gas, for tomorrow I die. Forget the brakes, they really don't work. The clutch always sticks, and starts with a jerk. My car grows red hair, and flies through the air. Driving's a blast, a blast from the past. |
Sponsored Links (Register now to hide all advertisements) |
|
08-04-2023, 06:31 AM | #3 |
Senior Member
Join Date: May 2010
Location: VA
Posts: 1,447
|
Re: Which Timing Gear?
When my old fiber gear failed, I pulled the engine so that I could clean the pan, easily adjust valves, etc.
There is a bronze gear available, also. http://www.modelaparts.net/special.htm/bronzegears.html |
08-04-2023, 07:09 AM | #4 |
Senior Member
Join Date: Mar 2017
Location: Connecticut Shoreline
Posts: 1,842
|
Re: Which Timing Gear?
This is like the question of what oil to use.
I have replaced a number of timing gears in my 60 plus years of driving Model A’s. I have always used a new fiber gear. Enjoy. |
08-04-2023, 09:08 AM | #5 |
Senior Member
Join Date: Aug 2012
Posts: 895
|
Re: Which Timing Gear?
Maybe that is why you have replaced a number of timing gears in your 60 plus years of driving Model A’s.
__________________
The Master Cylinder Enjoying life at the beach in SoCal... |
08-04-2023, 09:27 AM | #6 | |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,570
|
Re: Which Timing Gear?
Sponsored Links (Register now to hide all advertisements)
Quote:
|
|
08-04-2023, 09:43 AM | #7 |
Senior Member
Join Date: May 2010
Location: Southern Maine
Posts: 1,511
|
Re: Which Timing Gear?
I have aluminum timing gears with new crank gears in both of my A's. I have piece of mind and they don't make noise. What's not to like.
|
08-04-2023, 10:06 AM | #8 |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 3,527
|
Re: Which Timing Gear?
The aluminum gear is more durable, so that would be my choice!
__________________
Bob Bidonde |
08-04-2023, 11:25 AM | #9 |
Senior Member
Join Date: Jul 2010
Location: United Kingdom
Posts: 1,460
|
Re: Which Timing Gear?
"How many miles/years should someone expect from the fiber gear?" Anyone want to stick their head above the parapet and answer the OP question ??? (for my two pennyworth I'd guess 20-30K miles if using modern oils)
|
08-04-2023, 12:13 PM | #10 | |
Senior Member
Join Date: Mar 2017
Location: Connecticut Shoreline
Posts: 1,842
|
Re: Which Timing Gear?
Quote:
Our last car, that we just sold after 42 years, still had the fiber gear in it that I installed in the early 80’s. Checked it before we sold car. Gear had minimal tooth wear. I agree that with the typical mileage put on these cars yearly. They should last many owners. On a high mileage driver, I would think about the aluminum gear, think about it. Enjoy. |
|
08-04-2023, 02:26 PM | #11 |
Senior Member
Join Date: May 2010
Location: Southern Maine
Posts: 1,511
|
Re: Which Timing Gear?
The gear tooth contact has to be right, virtually no play. If there is much play the harmonics of the 4 cylinder crankshaft will chatter those fiber gear teeth right off.
|
08-04-2023, 02:56 PM | #12 |
Senior Member
Join Date: Jun 2010
Location: 34.22 N 118.36 W
Posts: 1,068
|
Re: Which Timing Gear?
Not to mention the motor modifications over the years
Adding more valve spring and or cam profile will beat up the stock gears In fact the way the engine is driven will also contribute to the deterioration of the stock gearset
__________________
As Carroll Smith wrote; All Failures are Human in Origin. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|