|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: Apr 2019
Location: Mt. Pleasant, SC
Posts: 607
|
![]()
None of the parts suppliers selling replacement 6 volt coils provide any detail or specify whether oil of epoxy filled.
What is considered to be the best replacement 6 v coil available ? Thanks - Jim |
![]() |
![]() |
![]() |
#2 |
Member
Join Date: Nov 2016
Location: Corrupt-A -Cut Eastern,Ct
Posts: 54
|
![]()
Try FS Ignitions, may be able to help. I am running their ignition system.
Bob |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
![]()
Pertronix offers both one point five and three OHM coils in either epoxy or oil filled versions .. The one point five OHM coil works with a six volt system . The three OHM version is for twelve volt systems . This is a performance coil that looks exactly like other replacement coils . You get instant starts and power that a person can feel . If the extra power frightens a person , they won't have to press the accelerator pedal quiet as far . I use these coils on all of my model A's The Pertronix coil was the best forty dollars that I have ever spent for a performance part .
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Dec 2014
Location: Germantown,TN
Posts: 523
|
![]()
Pertronic 40111 1.5 ohms epoxy filled is what I am using. No issues over five years.
https://www.summitracing.com/search/...ronics%2040111 |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Jul 2010
Location: Aiken, South Carolina
Posts: 695
|
![]()
I took Purdy's advice and got a Petronix epoxy filled coil, the "Flame Thrower." Let me just say, as usual, Purdy knoweth of what he speaketh.
|
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
![]() Sponsored Links (Register now to hide all advertisements)
|
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: May 2010
Location: Central FL, USA
Posts: 1,150
|
![]() |
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
![]()
Thanks Bob-A !!!
|
![]() |
![]() |
![]() |
#9 | |
Senior Member
Join Date: Jul 2016
Location: Orangeville Illinois
Posts: 472
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#10 | |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,565
|
![]() Quote:
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
|
![]() |
![]() |
![]() |
#11 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
![]()
Something else is more than likely wrong .
|
![]() |
![]() |
![]() |
#12 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,565
|
![]()
But what else could be wrong?? The car is 12 volt as was the coil. With no changes to anything, the replacement coil is still going fine after 7 years. The pertronic one lasted a few months.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
![]() |
![]() |
![]() |
#13 |
Senior Member
Join Date: Apr 2019
Location: Mt. Pleasant, SC
Posts: 607
|
![]()
Thanks for all the comments. I’m going to try the 6V Pertronic epoxy-filled coil, but will carry the original 90-year old coil as a back up.....or should I do it the other way around??
Jim |
![]() |
![]() |
![]() |
#14 | |
Senior Member
Join Date: May 2010
Posts: 2,803
|
![]() Quote:
Got nothing to lose ![]() |
|
![]() |
![]() |
![]() |
#15 |
Senior Member
Join Date: May 2010
Location: Largo Florida
Posts: 7,225
|
![]()
Anything can fail at any time. Coils included.
I just went thru something similar with condensers. 5 bad ones which some said couldn't happen. The 'burn-proof' maker must have had a bad batch. |
![]() |
![]() |
![]() |
#16 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
![]()
I have had excellent results for fourteen years with the Pertronix coils . There can be duds with any part that is offered . .
Last edited by Purdy Swoft; 10-27-2020 at 09:33 AM. |
![]() |
![]() |
![]() |
#17 | |
Senior Member
Join Date: Apr 2015
Location: Boise, Idaho
Posts: 1,581
|
![]() Quote:
I like it so much I got one for my '51 CJ-3a.....it too runs great... Keep the old coil as a spare that you know will work if needed. Randy... .
__________________
Early '29 CCPU that had a 4-speed, but not any more.......in the family since '62 |
|
![]() |
![]() |
![]() |
#18 |
Senior Member
Join Date: Mar 2015
Location: Greenville, SC
Posts: 1,099
|
![]()
Seems like everyone is on the hunt for something that didn't even exist for a useful purpose until the 1940's (epoxy). How did people get by for the previous 12 years, if a 90 year old coil is good enough for a spare - doesn't make sense.
John |
![]() |
![]() |
![]() |
#19 |
Senior Member
Join Date: May 2010
Location: Largo Florida
Posts: 7,225
|
![]()
Doesn't make sense ? Why doesn't it ?
Oil coils don't like to be tipped upside down [ neither do I ] and tar coils aren't made anymore. Epoxy is just a modern substitute. |
![]() |
![]() |
![]() |
#20 |
Senior Member
Join Date: Jul 2010
Location: Aiken, South Carolina
Posts: 695
|
![]()
Oil coils don't like to be tipped upside down [ neither do I ] and tar coils aren't made anymore. Epoxy is just a modern substitute.
Nailed it! |
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|